Home › Vehicle Interior › EXTERIOR › REAR BUMPER(for Resin Type Bumper)
RM27M0U _58 Vehicle Interior _049164 EXTERIOR _0234500 REAR BUMPER(for Resin Type Bumper) A

EXTERIOR  REAR BUMPER(for Resin Type Bumper)  DISASSEMBLY  


PROCEDURE

Hide 81690A 1.REMOVE LICENSE PLATE LIGHT ASSEMBLY LH

Hide 81270D 2.REMOVE LICENSE PLATE LIGHT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52164A 3.REMOVE REAR BUMPER PLATE LH

a.
B355013

Detach the 3 claws and clip and remove the rear bumper plate LH.


Hide 52163A 4.REMOVE REAR BUMPER PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 52057 5.REMOVE REAR BUMPER PAD SUB-ASSEMBLY LH

a.
B355014

Remove the 3 clips.


b.

Detach the 12 claws and 2 guides and remove the rear bumper pad sub-assembly LH as shown in the illustration.


c.

Detach the clamp from the No. 2 frame wire.


Hide 52156E 6.REMOVE REAR BUMPER EXTENSION INSERT LH

a.
B355019

Remove the 8 clips and rear bumper extension insert LH.


Hide 52155E 7.REMOVE REAR BUMPER EXTENSION INSERT RH

HINT:

Use the same procedure described for the LH side.


Hide 88172 8.REMOVE BLIND SPOT MONITOR SENSOR LH (w/ Blind Spot Monitor System)

Hide 88162 9.REMOVE BLIND SPOT MONITOR SENSOR RH (w/ Blind Spot Monitor System)

HINT:

Use the same procedure described for the LH side.


Hide 89341B 10.REMOVE NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Hide 89341C 11.REMOVE NO. 3 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Hide 82165 12.REMOVE NO. 2 FRAME WIRE

a.

w/ Towing Package:

i.

Detach all the clamps and remove the No. 2 frame wire from the receiver hitch bracket sub-assembly.

B408377E02
0.24,0.24 0.583,0.583 0.344,0.344 10 false *A 0.24,4.094 0.583,4.438 0.344,0.344 10 false *B 0.292,0.635 0.635,0.979 0.344,0.344 10 false *C 0.302,2.344 0.646,2.688 0.344,0.344 10 false *D 0.365,4.427 0.708,4.771 0.344,0.344 10 false *C 0.354,6.146 0.698,6.49 0.344,0.344 10 false *D

Text in Illustration
*A w/ Intuitive Parking Assist System *B w/o Intuitive Parking Assist System
*C w/ Blind Spot Monitor System *D w/o Blind Spot Monitor System



b.

w/o Towing Package:

i.

Detach all the clamps and remove the No. 2 frame wire from the rear bumper reinforcement sub-assembly.

B408378E02
0.24,0.24 0.563,0.479 0.323,0.24 10 false *A 0.302,0.594 0.625,0.833 0.323,0.24 10 false *C 0.313,2.313 0.635,2.552 0.323,0.24 10 false *D 0.354,4.417 0.677,4.656 0.323,0.24 10 false *C 0.354,6.104 0.677,6.344 0.323,0.24 10 false *D 0.25,4.083 0.542,4.375 0.292,0.292 10 false *B

Text in Illustration
*A w/ Intuitive Parking Assist System *B w/o Intuitive Parking Assist System
*C w/ Blind Spot Monitor System *D w/o Blind Spot Monitor System



Hide 52154B 13.REMOVE REAR BUMPER SIDE STAY LH

a.
B408375

Remove the 6 bolts and rear bumper side stay LH.


Hide 52153A 14.REMOVE REAR BUMPER SIDE STAY RH

HINT:

Use the same procedure described for the LH side.


Hide 52159B 15.REMOVE REAR BUMPER PLATE

a.
B356290E02
0.073,0.125 0.51,0.479 0.438,0.354 10 false *A 0.115,2.271 0.552,2.625 0.438,0.354 10 false *B

Remove the 2 bolts and rear bumper plate.

Text in Illustration
*A w/ Towing Package
*B w/o Towing Package


Hide 52166A 16.REMOVE REAR BUMPER UPPER COVER LH

a.
B355025

Remove the 2 nuts and rear bumper upper cover LH.


Hide 52165A 17.REMOVE REAR BUMPER UPPER COVER RH

HINT:

Use the same procedure described for the LH side.