| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | SHIFT STROKE SENSOR | 89419B | ( )
|
- | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
|
Toyota Genuine CVT Fluid FE |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 2 | AIR CLEANER CASE SUB-ASSEMBLY | 17701 | - | - | - |
| 3 | AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY | 17801 | - | - | - |
| 4 | AIR CLEANER CAP WITH AIR CLEANER HOSE | - | - | - | - |
| 5 | CHECK DATA LIST | - | ( )
|
- | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
89419B
1.INSTALL SHIFT STROKE SENSOR
Coat the O-ring of the shift stroke sensor with Toyota Genuine CVT fluid FE.
If reusing the shift stroke sensor, check that the O-ring is not damaged.
Install the shift stroke sensor to the transaxle case sub-assembly with the bolt.
Be careful not to damage the O-ring.
Connect the shift stroke sensor connector.
17701
2.INSTALL AIR CLEANER CASE SUB-ASSEMBLY
17801
3.INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
4.INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE
5.CHECK DATA LIST