| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | WINDSHIELD GLASS | 56111 | - | - | - |
| 2 | FRONT PILLAR UPPER COVER SUB-ASSEMBLY | 60118 | ( )
|
- | - |
| 3 | NO. 4 BLACK OUT TAPE | 75928C | ( )
|
- | - |
| ● | Non-reusable part | - | - |
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
56111
1.REMOVE WINDSHIELD GLASS
75928C
3.REMOVE NO. 4 BLACK OUT TAPE
|
|
| Item | Temperature |
|---|---|
·
Vehicle Body ·
No. 4 Black Out Tape |
40 to 60°C (104 to 140°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the vehicle body excessively.
|
Warming range | - | - |
Using a heat light, heat the No. 4 black out tape and vehicle body.
Pull back on one of the ends of the No. 4 black out tape to remove it.
When pulling on the No. 4 black out tape, pull it parallel to the vehicle body.