Home › Drivetrain › P910 (HYBRID TRANSMISSION / TRANSAXLE) › HYBRID VEHICLE TRANSAXLE › 2020.08–2021.07
RM3700E _52 Drivetrain _093735 P910 HYBRID TRANSMISSION / TRANSAXLE _0441812 HYBRID VEHICLE TRANSAXLE A

P910 HYBRID TRANSMISSION / TRANSAXLE  HYBRID VEHICLE TRANSAXLE  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
C445362N01
3.531,0.844 4.281,1.01 0.75,0.167 2.177,1.208 2.875,1.375 0.698,0.167 4.458,0.615 5.281,0.781 0.823,0.167 5.75,0.667 6.417,0.833 0.667,0.167 2.708,5.292 3.417,5.469 0.708,0.177 1.49,5.313 2.302,5.646 0.813,0.333 0.583,3.917 1.542,4.083 0.958,0.167 1.396,4.156 2.448,4.313 1.052,0.156 0.479,3.094 1.188,3.26 0.708,0.167 1.417,5.25 2.365,5.708 0.948,0.458 4.281,0.917 4.448,0.917 false 5.281,0.698 5.375,0.698 false 5.75,1.365 6.083,1.365 false 6.417,0.75 7,0.75 7,0.75 7,2.281 false 6.667,0.75 6.667,1.333 false 6.75,2.51 6.75,2.813 false 2.698,4.833 2.833,5.083 2.833,5.083 3,5.083 false 2.469,4.833 2.635,5.385 2.635,5.385 2.708,5.385 false 0.583,4.844 0.667,4.333 0.667,4.333 0.833,4.333 false 0.24,4.938 0.417,4 0.417,4 0.583,4 false 1.896,3.823 1.896,4.156 false 1.198,3.188 1.531,3.188 false 2,3.417 2.167,3.417 2.167,3.417 2.479,3.563 false 1.667,2.667 2,2.667 false 1.917,5.313 1.917,5.146 1.917,5.146 2.198,4.813 false 5.469,0.958 5.698,0.385 5.698,0.385 5.865,0.385 false 2.875,1.292 3.042,1.292 3.042,1.292 3.146,1.396 false 1.958,1.135 2.24,1.49 0.281,0.354 18 false 4 1.781,1.208 2.031,1.458 0.25,0.25 10 false ★ 3.323,0.781 3.604,1.135 0.281,0.354 18 false 2 3.573,0.854 4.469,1.021 0.896,0.167 8 false 11.3 (115, 8) 2.219,1.219 3.042,1.385 0.823,0.167 8 false 10 (102, 7) 4.271,0.552 4.552,0.906 0.281,0.354 18 false 3 4.521,0.625 5.354,0.781 0.833,0.156 8 false 39.2 (400, 29) 5.917,0.333 6.531,0.5 0.615,0.167 10 false ● 5.563,1.229 5.844,1.583 0.281,0.354 18 false 5 5.802,0.677 6.677,0.854 0.875,0.177 8 false 10 (102, 7) 6.698,2.833 6.979,3.188 0.281,0.354 18 false 5 3.26,1.438 3.51,1.604 0.25,0.167 10 false x2 3.052,4.99 3.667,5.156 0.615,0.167 10 false ● 2.74,5.302 3.615,5.479 0.875,0.177 8 false 27 (275, 20) 3.719,5.208 4,5.563 0.281,0.354 18 false 1 1.552,5.333 2.5,5.49 0.948,0.156 8 false 34.3 (350, 25) 1.531,5.479 2.448,5.646 0.917,0.167 8 false 29.4 (300, 22)* 0.833,5.313 1.615,5.667 0.781,0.354 18 false 8, 10 0.896,4.167 1.5,4.448 0.604,0.281 18 false 9 0.604,3.917 1.656,4.115 1.052,0.198 8 false 8.0 (82, 71 in.*lbf) 1.458,4.156 2.469,4.313 1.01,0.156 8 false 8.0 (82, 71 in.*lbf) 0.542,3.104 1.333,3.281 0.792,0.177 8 false 12 (122, 9) 1.833,3.26 2.115,3.615 0.281,0.354 18 false 7 1.479,2.51 1.76,2.865 0.281,0.354 18 false 6 0.708,5.385 1.323,5.552 0.615,0.167 10 false ●

Procedure Part Name Code
Z101186

Z101188

Z101187

1 UNION - (Click here) - -
2 TRANSAXLE BREATHER PLUG 30900N - - -
3 TRANSAXLE HOUSING PLUG - - - -
4 STUD BOLT - (Click here) - -
5 WIRE HARNESS CLAMP BRACKET - - - -
6 NO. 1 TRANSMISSION CONTROL CABLE BRACKET 33823 - - -
7 HOSE BRACKET 44781E - - -
8 TEMPORARILY INSTALL NO. 1 MOTOR COOLING PIPE G1251B - - -
9 NO. 2 OIL COOLER TUBE CLAMP 32924E - - -
10 FULLY TIGHTEN NO. 1 MOTOR COOLING PIPE G1251B (Click here) - -

V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf)
V100146

N*m (kgf*cm, ft.*lbf): Specified torque
* For use with SST ● Non-reusable part
V100135

Toyota Genuine ATF WS
V100136

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
★ Precoated part - -

C442332N02
0.094,5.365 1.083,5.531 0.99,0.167 1.094,3.208 1.823,3.375 0.729,0.167 1.052,3.167 1.865,3.417 0.813,0.25 2.438,1.51 3.094,1.677 0.656,0.167 2.396,1.469 3.135,1.719 0.74,0.25 2.146,0.219 2.813,0.385 0.667,0.167 4.146,1 4.438,1 false 4.063,0.365 4.354,0.365 false 4.604,1.667 5.01,1.667 false 1.313,5.354 1.25,5.448 1.25,5.448 1.083,5.448 false 1.146,4.833 1.375,4.833 false 1.823,3.292 2.198,3.292 false 2.333,2.917 2.5,2.917 2.5,2.917 2.813,3.813 false 3.104,1.594 3.438,1.594 false 2.823,0.302 3.156,0.302 false 4.813,0.885 4.969,1.083 0.156,0.198 10 false ● 4.917,0.771 5.24,1.104 0.323,0.333 18 false 13 4.688,0.125 5.073,0.5 0.385,0.375 18 false 14 5.365,1.438 5.75,1.813 0.385,0.375 18 false 12 3.292,0.333 3.677,0.542 0.385,0.208 10 false x2 3.583,1.615 3.802,1.823 0.219,0.208 10 false x6 1.385,5.313 1.604,5.521 0.219,0.208 10 false x3 0.135,5.375 1.229,5.531 1.094,0.156 8 false 8.0 (82, 71 in.*lbf) 0.844,4.604 1.229,4.979 0.385,0.375 18 false 11 1.146,3.219 1.969,3.375 0.823,0.156 8 false 35 (357, 26) 2.135,2.854 2.635,3.104 0.5,0.25 10 false ● 2.49,1.51 3.229,1.688 0.74,0.177 8 false 10 (102, 7) 2.198,0.219 2.969,0.375 0.771,0.156 8 false 10 (102, 7)

Procedure Part Name Code
Z101186

Z101188

Z101187

11 MOTOR COOLING COOLER G125A (Click here) - -
12 MOTOR CABLE G1148 (Click here) - -
13 TERMINAL CAP 82823M (Click here) - -
14 CONNECTOR COVER 82821T (Click here) - -

V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf)
V100146

N*m (kgf*cm, ft.*lbf): Specified torque
● Non-reusable part - -

C442333N02
6.073,0.583 6.823,0.75 0.75,0.167 6.094,2.615 6.823,2.781 0.729,0.167 0.115,2.5 0.823,2.667 0.708,0.167 1.51,5.125 2.219,5.292 0.708,0.167 1.125,4.177 2,4.344 0.875,0.167 1.083,4.135 2.042,4.385 0.958,0.25 1.458,5.083 2.26,5.333 0.802,0.25 1.927,1.063 2.188,1.063 false 5.729,0.667 6.063,0.667 false 5.75,2.698 6.083,2.698 false 6.281,4.375 6.615,4.375 false 2.885,4.729 2.99,5.229 2.99,5.229 3.146,5.229 false 2.229,5.208 2.563,5.208 false 2,4.26 2.333,4.26 false 0.823,2.583 1.156,2.583 false 1.01,0.375 1.167,0.375 1.167,0.375 1.229,0.781 false 1.615,0.927 2.167,1.281 0.552,0.354 18 false 17 6.667,4.167 7,4.469 0.333,0.302 18 false 16 3.448,5.021 4,5.375 0.552,0.354 18 false 15 2.656,5.25 2.958,5.438 0.302,0.188 10 false x3 1.156,2.656 1.458,2.844 0.302,0.188 10 false x5 6.125,0.594 6.896,0.76 0.771,0.167 8 false 46 (469, 34) 6.125,2.625 6.896,2.792 0.771,0.167 8 false 25 (255, 18) 0.146,2.51 1.021,2.677 0.875,0.167 8 false 46 (469, 34) 1.552,5.146 2.375,5.281 0.823,0.135 8 false 44 (449, 32) 1.156,4.188 2.104,4.333 0.948,0.146 8 false 170 (1734, 125) 0.688,0.177 1.01,0.438 0.323,0.26 18 false 17

Procedure Part Name Code
Z101186

Z101188

Z101187

15 NO. 2 ENGINE MOVING CONTROL ROD 12364B (Click here) - -
16 FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY 51201 - - -
17 ENGINE ASSEMBLY - (Click here) - -

V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf)
V100146

N*m (kgf*cm, ft.*lbf): Specified torque

C442334N02
3.5,0.083 4.25,0.26 0.75,0.177 0.344,3.302 1.063,3.469 0.719,0.167 2.938,2.5 3.667,2.667 0.729,0.167 2.896,2.458 3.708,2.708 0.813,0.25 6.167,4.25 7,4.417 0.833,0.167 0.802,1.104 0.802,0.854 false 1.865,1.125 1.865,0.875 false 3.5,0.167 3.333,0.167 3.333,0.167 3.125,0.333 false 3.521,0.49 3.396,0.49 3.396,0.49 3.26,0.604 false 6.719,0.271 6.385,0.271 false 5.365,4.25 5.031,4.25 false 1.448,5.167 1.115,5.167 false 1.729,3.802 1.396,3.802 false 1.396,3.385 1.063,3.385 false 2.167,2.75 2,2.75 2,2.75 1.729,2.542 false 4.083,2.875 3.833,2.583 3.833,2.583 3.667,2.583 false 6.104,3.448 5.938,3.448 5.938,3.448 5.771,3.771 false 6.583,4.25 6.583,4.083 6.583,4.083 6.656,3.823 false 6.281,1.313 5.99,1.313 false 0.677,1.104 1.229,1.458 0.552,0.354 18 false 24 1.74,1.135 2.292,1.49 0.552,0.354 18 false 24 0.417,0.823 0.719,1.094 0.302,0.271 10 false x2 2.385,0.813 2.688,1.083 0.302,0.271 10 false x2 3.135,0.344 3.438,0.615 0.302,0.271 10 false x2 3.542,0.094 4.375,0.26 0.833,0.167 8 false 10 (102, 7) 3.885,0.333 4.438,0.688 0.552,0.354 18 false 22 6.094,0.104 6.646,0.458 0.552,0.354 18 false 26 6.646,1.177 7.042,1.594 0.396,0.417 18 false 23 5.406,4.125 5.802,4.542 0.396,0.417 18 false 25 0.813,5.01 1.208,5.427 0.396,0.417 18 false 20 1.094,3.667 1.49,4.083 0.396,0.417 18 false 21 1.458,3.438 1.76,3.708 0.302,0.271 10 false x2 0.385,3.313 1.156,3.5 0.771,0.188 8 false 46 (469, 34) 2.188,2.594 2.583,3.01 0.396,0.417 18 false 19 2.99,2.5 3.781,2.688 0.792,0.188 8 false 20 (204, 15) 6.729,3.771 7.031,4.042 0.302,0.271 10 false x2 6.208,4.26 7.073,4.448 0.865,0.188 8 false 17.6 (179, 13) 6.427,3.323 6.823,3.74 0.396,0.417 18 false 18

Procedure Part Name Code
Z101186

Z101188

Z101187

18 DRIVE SHAFT HEAT INSULATOR SUB-ASSEMBLY 43409E (Click here) - -
19 NO. 3 WATER BY-PASS HOSE ASSEMBLY 16290F - - -
20 FLYWHEEL HOUSING SIDE COVER 11363A - - -
21 STARTER HOLE INSULATOR 28193 - - -
22 HV AIR CONDITIONING WIRE 821H2 (Click here) - -
23 ENGINE WIRE 82121 (Click here) - -
24 ENGINE HANGER - - - -
25 ENGINE ASSEMBLY WITH TRANSAXLE - - - -
26 PERFORM RESOLVER LEARNING - - - (Click here)

V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf)
V100146

N*m (kgf*cm, ft.*lbf): Specified torque

CAUTION / NOTICE / HINT

CAUTION:

The engine assembly with hybrid vehicle transaxle assembly is very heavy. Be sure to follow the procedure described in the repair manual, or the engine lifter may suddenly drop.


PROCEDURE

Hide 1.INSTALL UNION

Z101186

HINT:

Perform this procedure only when replacement of the union or O-ring is necessary.



a.
C442335C01
0.438,0.083 1.813,0.438 1.375,0.354 18 false i, ii
V100135

Toyota Genuine ATF WS - -


i.

Coat a new O-ring with ATF.


ii.

Install the union and O-ring to the hybrid vehicle transaxle assembly.

Torque:
27 N*m (275 kgf*cm, 20 ft.*lbf)



Hide 30900N 2.INSTALL TRANSAXLE BREATHER PLUG

Z101186

HINT:

Perform this procedure only when replacement of the transaxle breather plug is necessary.



Torque:
11.3 N*m (115 kgf*cm, 8 ft.*lbf)

Hide 3.INSTALL TRANSAXLE HOUSING PLUG

Z101186

HINT:

Perform this procedure only when replacement of the transaxle housing plug or gasket is necessary.



Torque:
39.2 N*m (400 kgf*cm, 29 ft.*lbf)

Hide 4.INSTALL STUD BOLT

a.
C442336C01
2.073,1.083 2.354,1.438 0.281,0.354 18 false i 3.563,0.083 3.844,0.438 0.281,0.354 18 false ii

i.

Apply adhesive to 2 or 3 threads on the ends of the 2 stud bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent


NOTICE:

In order to ensure proper sealing of the 2 stud bolts, install them within 10 minutes of applying adhesive.



ii.

Using a E8 "TORX" socket wrench, install the 2 stud bolts to the hybrid vehicle transaxle assembly.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:

Clean and degrease the 2 stud bolt holes of the hybrid vehicle transaxle assembly.




Hide 5.INSTALL WIRE HARNESS CLAMP BRACKET

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

Hide 33823 6.INSTALL NO. 1 TRANSMISSION CONTROL CABLE BRACKET

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)

Hide 44781E 7.INSTALL HOSE BRACKET

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

Hide G1251B 8.TEMPORARILY INSTALL NO. 1 MOTOR COOLING PIPE

Hide 32924E 9.INSTALL NO. 2 OIL COOLER TUBE CLAMP

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

Hide G1251B 10.FULLY TIGHTEN NO. 1 MOTOR COOLING PIPE

a.
C442337C01
4.292,1.073 4.604,1.271 0.313,0.198 10 false *a 0.458,0 0.75,0.313 0.292,0.313 18 false i
*a Torque Wrench Fulcrum Length - -


i.

Using a 17 mm union nut wrench, tighten the flare nut to install the No. 1 motor cooling pipe.

Torque:
Specified Tightening Torque : 34.3 N*m (350 kgf*cm, 25 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a 17 mm union nut wrench (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)):

29.4 N*m (300 kgf*cm, 22 ft.*lbf)





Hide G125A 11.INSTALL MOTOR COOLING COOLER

a.
C442338C01
4.448,2.906 4.219,2.917 4.219,2.917 4.438,3 true 0.563,0.594 1.219,0.781 0.656,0.188 10 true 1 (*a), 4 4.75,3.208 4.938,3.365 0.188,0.156 10 false *b 0.583,1.583 0.771,1.74 0.188,0.156 10 false 3 0.781,0.042 1.292,0.375 0.51,0.333 18 true i, ii 5.677,0.042 6.188,0.375 0.51,0.333 18 true iii, v 5.146,0.708 5.479,1.052 0.333,0.344 18 true iv 2.271,2.063 2.604,2.406 0.333,0.344 18 true vi 4.052,2.823 4.24,2.979 0.188,0.156 10 false *c 1.604,1.75 1.792,1.906 0.188,0.156 10 false 2
*a Temporarily Tighten *b 2 to 7 mm (0.0787 to 0.276 in.)
*c Paint Mark - -


i.

Temporarily install the motor cooling cooler with No. 2 motor cooling pipe to the hybrid vehicle transaxle assembly with the 3 bolts.


ii.

Tighten the 3 bolts in the order shown in the illustration.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


iii.

Temporarily install the No. 2 motor cooling pipe to the hybrid vehicle transaxle assembly with the oil cooler union bolt and a new gasket.


iv.

Engage the clamp.


v.

Tighten the oil cooler union bolt to install the No. 2 motor cooling pipe.

Torque:
35 N*m (357 kgf*cm, 26 ft.*lbf)


vi.

Connect the No. 1 motor cooling hose to the No. 1 motor cooling pipe and slide the clip to secure it.

NOTICE:

Make sure to align the paint mark on the No. 1 motor cooling pipe with the paint mark on the No. 1 motor cooling hose.




Hide G1148 12.INSTALL MOTOR CABLE

Z101186

Click here(Click here)

Hide 82823M 13.INSTALL TERMINAL CAP

Z101186

Click here(Click here)

Hide 82821T 14.INSTALL CONNECTOR COVER

Z101186

Click here(Click here)

Hide 12364B 15.INSTALL NO. 2 ENGINE MOVING CONTROL ROD

a.
C442339C02
0.427,0.021 1.802,0.375 1.375,0.354 18 false i 2.896,0.25 3.49,0.448 0.594,0.198 10 true 1 (*a), 4 3.927,1.385 4.146,1.583 0.219,0.198 10 true 2 4.229,0.271 4.448,0.469 0.219,0.198 10 true 3
*a Temporarily Tighten - -


i.

Install the No. 2 engine moving control rod to the hybrid vehicle transaxle assembly with the 3 bolts in the order shown in the illustration.

Torque:
44 N*m (449 kgf*cm, 32 ft.*lbf)



Hide 51201 16.TEMPORARILY INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

Hide 17.INSTALL ENGINE ASSEMBLY

a.
C442340C01
6.313,0.073 6.469,0.271 0.156,0.198 10 false A 6.417,1.604 6.583,1.76 0.167,0.156 10 false B 6.635,1.344 6.802,1.5 0.167,0.156 10 true C 5.125,1.625 5.292,1.781 0.167,0.156 10 true C 4.938,1.354 5.104,1.51 0.167,0.156 10 true C 4.771,0.792 4.938,0.948 0.167,0.156 10 true C 4.927,0.302 5.094,0.458 0.167,0.156 10 true C 2.865,0.188 3.115,0.365 0.25,0.177 10 true *1 0.802,0.688 1.052,0.865 0.25,0.177 10 true *1 0.385,0.021 0.635,0.292 0.25,0.271 18 true i 4.521,0.021 4.771,0.292 0.25,0.271 18 true ii
*1 Knock Pin - -


i.

Make sure that the knock pins are installed to the engine assembly.


ii.

Install the engine assembly to the hybrid vehicle transaxle assembly with the 7 bolts.

Bolt Bolt Length Torque
(A), (C) 45 mm (1.77 in.) 46 N*m (469 kgf*cm, 34 ft.*lbf)
(B) 35 mm (1.38 in.) 25 N*m (255 kgf*cm, 18 ft.*lbf)

NOTICE:
·

When tightening the bolts, be sure that the contact surfaces of the engine assembly and hybrid vehicle transaxle assembly are in close contact with one another.

·

Temporarily tighten the bolt (A), and then fully tighten the 7 bolts in the order of (B), (A) and (C).

·

Do not apply grease to the inner splines of the transmission input damper assembly or input shaft assembly.

·

Make sure that the wire harness or similar items are not pinched between the contact surfaces.

·

Do not use excessive force when installing the engine assembly.

·

Make sure to align the hybrid vehicle transaxle assembly so that the input shaft assembly of the hybrid vehicle transaxle assembly will be inserted straight into the inner splines of the transmission input damper assembly.

·

When inserting the input shaft assembly of the hybrid vehicle transaxle assembly into the inner splines of the transmission input damper assembly, do not shake the engine assembly.

·

When installing the engine assembly to the hybrid vehicle transaxle assembly, make sure to securely fit the knock pins into the knock pin holes.





Hide 43409E 18.INSTALL DRIVE SHAFT HEAT INSULATOR SUB-ASSEMBLY

a.
C442341C01
0.406,0.031 0.979,0.406 0.573,0.375 18 false i, ii 2.229,0.417 2.354,0.573 0.125,0.156 10 true 2 4.771,0.656 5.333,0.813 0.563,0.156 10 true 1 (*a), 3
*a Temporarily Tighten - -


i.

Temporarily install the drive shaft insulator sub-assembly to the cylinder block sub-assembly and hybrid vehicle transaxle assembly with the 2 bolts.


ii.

Tighten the 2 bolts in the order shown in the illustration.

Torque:
17.6 N*m (179 kgf*cm, 13 ft.*lbf)



Hide 16290F 19.CONNECT NO. 3 WATER BY-PASS HOSE ASSEMBLY

Hide 11363A 20.INSTALL FLYWHEEL HOUSING SIDE COVER

Hide 28193 21.INSTALL STARTER HOLE INSULATOR

Torque:
46 N*m (469 kgf*cm, 34 ft.*lbf)

Hide 821H2 22.INSTALL HV AIR CONDITIONING WIRE

a.
C442342C01
4.906,0.573 5.083,0.333 5.083,0.333 5.25,0.333 true 1.438,0.115 1.708,0.396 0.271,0.281 18 true i 0.219,2 0.49,2.281 0.271,0.281 18 true ii 3.708,1.99 3.979,2.271 0.271,0.281 18 true iii 5.292,0.271 5.531,0.469 0.24,0.198 10 false *a
*a Green-colored Lock - -
V100137

Slide - -


i.

Connect the connector and slide the green-colored lock as shown in the illustration to lock it securely.

CAUTION:

Make sure to wear insulated gloves.


NOTICE:

Make sure that the connector is connected securely.



ii.

Engage the clamp.


iii.

Install the HV air conditioning wire to the hybrid vehicle transaxle assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)



Hide 82121 23.CONNECT ENGINE WIRE

a.
C442325N02
0.323,0 0.708,0.313 0.385,0.313 18 false vi 3.958,1.333 4.125,1.625 0.167,0.292 18 true v 4.906,0.542 5.125,0.833 0.219,0.292 18 true iv 4.646,1.292 4.865,1.583 0.219,0.292 18 true iii 5.75,0.167 5.969,0.458 0.219,0.292 18 true ii 6.094,1.042 6.271,1.333 0.177,0.292 18 true i

i.

Connect the resolver (transmission fluid temperature sensor) connector.


ii.

Connect the generator temperature sensor connector.


iii.

Confirm that no foreign matter or water has entered the connector of the shift lever position sensor and connect the connector.


iv.

Engage the clamp.


v.

Install the bolt.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


vi.

Engage the 6 clamps.



Hide 25.INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

Hide 26. PERFORM RESOLVER LEARNING

Z101186

NOTICE:

If the hybrid vehicle transaxle assembly has been replaced, make sure to perform resolver learning.

Click here(Click here)