Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER (for Gasoline Model TMMF Made RHD) › from 2021.07
RM3700E _54 Brake _093767 BRAKE SYSTEM (OTHER) _0480869 BRAKE MASTER CYLINDER(for Gasoline Model TMMF Made RHD) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(for Gasoline Model TMMF Made RHD)  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
C460950N02
3.063,0.927 3.396,0.927 false 4.302,1.51 4.635,1.51 false 5.302,2.083 5.635,2.083 false 4.5,3.375 4.833,3.375 false 6.49,0.302 6.823,0.302 false 5.688,1.906 5.969,2.26 0.281,0.354 18 false 3 4.677,1.333 4.958,1.688 0.281,0.354 18 false 2 3.438,0.76 3.719,1.115 0.281,0.354 18 false 1 4.896,3.229 5.177,3.583 0.281,0.354 18 false 4 6.281,0.146 6.563,0.5 0.281,0.354 18 false 5 2.26,1.354 2.719,1.552 0.458,0.198 10 false x12

Procedure Part Name Code
Z101186

Z101188

Z101187

1 WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY - - - -
2 FRONT NO. 1 VENTILATOR SEAL 55815E - - -
3 WATER GUARD PLATE LH 55735A - - -
4 OUTER COWL TOP PANEL SUB-ASSEMBLY 55701J - - -
5 DRAIN BRAKE FLUID - - (Click here) -

C460984N01
3.583,0.333 4.667,1.25 1.083,0.917 4,2.927 4,2.594 false 1.042,3.021 1.042,2.688 false 2.125,1.104 2.333,0.75 2.333,0.75 2.5,0.75 false 4,0.854 4.167,0.604 4.167,0.604 4.333,0.604 false 3.583,4 3.583,3.344 false 3.333,4 3.917,4 3.917,4 3.917,3.292 true 4.396,0.438 4.677,0.792 0.281,0.354 18 false 6 3.135,3.854 3.417,4.208 0.281,0.354 18 false 7 2.76,0.563 3.042,0.917 0.281,0.354 18 false 8 4.052,2.875 4.333,3.229 0.281,0.354 18 false 9 3.885,2.906 4.042,3.104 0.156,0.198 10 false ● 1,3.021 1.156,3.219 0.156,0.198 10 false ● 1.104,2.635 1.417,2.833 0.313,0.198 10 false x2 3.625,0.365 4,0.604 0.375,0.24 12 false *A

Procedure Part Name Code
Z101186

Z101188

Z101187

6 NO. 1 CLUTCH RESERVOIR HOSE 31434E - - -
7 BRAKE LINE - (Click here) - -
8 BRAKE MASTER CYLINDER SUB-ASSEMBLY 47201 (Click here) - -
9 BRAKE MASTER CYLINDER O-RING - - - -

*A for Manual Transaxle - -
● Non-reusable part - -

CAUTION / NOTICE / HINT

NOTICE:

Make sure to release vacuum from the brake booster assembly before removing the brake master cylinder sub-assembly from the brake booster assembly.


PROCEDURE

Hide 1.REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

Hide 55815E 2.REMOVE FRONT NO. 1 VENTILATOR SEAL

Hide 55701J 4.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY

Hide 5.DRAIN BRAKE FLUID

Z101186

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.



Hide 31434E 6.DISCONNECT NO. 1 CLUTCH RESERVOIR HOSE (for Manual Transaxle)

a.
C460988


Hide 7.DISCONNECT BRAKE LINE

Z101186

NOTICE:
·

Do not damage or deform the brake lines.

·

Do not allow any foreign matter such as dirt or dust to enter the brake lines from the connecting parts.




a.
C460989N01
1.646,0.052 1.927,0.406 0.281,0.354 18 false i

i.

Using a union nut wrench, disconnect the 2 brake lines from the brake master cylinder sub-assembly.



Hide 47201 8.REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

a.
C460990C01
0.177,0.104 0.458,0.458 0.281,0.354 18 false i 3.979,0.5 4.26,0.854 0.281,0.354 18 false ii
V113147

Push in this direction
V113148

Disconnect the connector


i.

Disconnect the connector from the brake master cylinder reservoir assembly.


ii.

Remove the 2 nuts and brake master cylinder sub-assembly from the brake booster assembly.

NOTICE:
·

The brake master cylinder sub-assembly requires careful handling. Do not drop or subject the brake master cylinder sub-assembly to any impact. Do not reuse a brake master cylinder sub-assembly that has been dropped.

·

Do not hold the brake master cylinder sub-assembly by the master cylinder piston. Hold the brake master cylinder sub-assembly by its body or its reservoir when carrying it.

·

Do not pull out the master cylinder piston.

·

Do not strike or pinch the master cylinder piston, or cause any damage to the master cylinder piston by any other means.

·

When installing the brake master cylinder sub-assembly to the brake booster assembly, or when removing the brake master cylinder sub-assembly from the brake booster assembly, make sure that the brake master cylinder sub-assembly is kept horizontal or with its tip facing downward (the master cylinder piston is facing upward) to prevent the master cylinder piston from falling out.

·

Do not allow any foreign matter to contaminate the master cylinder piston. If any foreign matter gets on the master cylinder piston, remove it by using a piece of new and dry cloth. Do not use water or detergent. Then apply an even layer of lithium soap base glycol grease around the circumference (sliding part) of the master cylinder piston.

·

Do not use any other types of grease.

·

Make sure to release vacuum from the brake booster assembly before removing the brake master cylinder sub-assembly from the brake booster assembly.





Hide 9.REMOVE BRAKE MASTER CYLINDER O-RING

a.
C460991