Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type without TAS Type) › from 2021.07
RM3700E _56 Audio / Visual / Telematics _093686 AUDIO / VIDEO _0484172 AUDIO AND VISUAL SYSTEM(for Radio and Display Type without TAS Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type without TAS Type)  Speaker Circuit  


DESCRIPTION

If there is a short in a speaker circuit, the radio and display receiver assembly detects it and stops output to the speakers.

Thus sound cannot be heard from the speakers even if there is no malfunction in the radio and display receiver assembly or speakers.


WIRING DIAGRAM

for 2 Speakers
E439263E01
3.135,1.771 3.75,1.969 0.615,0.198 10 false H130 3.125,1.938 5.115,2.229 1.99,0.292 10 false Wiring Harness Connector RH 3.135,3.344 3.75,3.542 0.615,0.198 10 false H129 3.125,3.51 5.115,3.802 1.99,0.292 10 false Wiring Harness Connector LH 5.583,3.865 6.781,4.344 1.198,0.479 10 false Radio and Display Receiver Assembly 5.583,3.677 6.198,3.875 0.615,0.198 10 false H83 5.615,0.875 6.229,1.073 0.615,0.198 10 false FR+ 5.625,1.594 6.24,1.792 0.615,0.198 10 false FR- 5.635,3.135 6.25,3.333 0.615,0.198 10 false FL- 5.625,2.417 6.24,2.615 0.615,0.198 10 false FL+ 3.542,0.896 4.156,1.094 0.615,0.198 10 false TWR+ 3.542,1.615 4.156,1.813 0.615,0.198 10 false TWR- 3.552,2.417 4.167,2.615 0.615,0.198 10 false TWL+ 3.563,3.135 4.177,3.333 0.615,0.198 10 false TWL- 0.938,1.177 2.208,1.688 1.271,0.51 10 false Front No. 1 Speaker Assembly RH 0.938,2.698 2.208,3.208 1.271,0.51 10 false Front No. 1 Speaker Assembly LH 0.938,1 1.552,1.198 0.615,0.198 10 false K2 0.948,2.51 1.563,2.708 0.615,0.198 10 false L2 2.323,0.969 2.573,1.177 0.25,0.208 10 false 2 2.323,1.521 2.573,1.729 0.25,0.208 10 false 1 2.323,2.5 2.573,2.708 0.25,0.208 10 false 2 2.323,3.042 2.573,3.25 0.25,0.208 10 false 1 3.354,1.479 3.604,1.688 0.25,0.208 10 false 2 3.354,3 3.604,3.208 0.25,0.208 10 false 2 3.365,0.771 3.615,0.979 0.25,0.208 10 false 4 3.344,2.302 3.594,2.51 0.25,0.208 10 false 4 4.615,2.302 4.865,2.51 0.25,0.208 10 false 3 4.604,0.781 4.854,0.99 0.25,0.208 10 false 3 4.615,3 4.865,3.208 0.25,0.208 10 false 1 4.604,1.49 4.854,1.698 0.25,0.208 10 false 1 5.417,0.76 5.667,0.969 0.25,0.208 10 false 1 5.417,1.49 5.667,1.698 0.25,0.208 10 false 6 5.417,2.302 5.667,2.51 0.25,0.208 10 false 2 5.417,3 5.667,3.208 0.25,0.208 10 false 7 4.375,0.885 4.667,1.094 0.292,0.208 10 false + 4.385,1.594 4.677,1.802 0.292,0.208 10 false - 4.375,2.406 4.667,2.615 0.292,0.208 10 false + 4.385,3.115 4.677,3.323 0.292,0.208 10 false -

for 4 Speakers
E445951E01
0.813,1.115 1.125,1.313 0.313,0.198 10 false K2 0.813,1.281 2.104,1.646 1.292,0.365 10 false Front No. 1 Speaker Assembly RH 2.24,1.021 2.552,1.219 0.313,0.198 10 false 2 2.24,1.615 2.552,1.813 0.313,0.198 10 false 1 3.292,0.833 3.604,1.031 0.313,0.198 10 false 4 3.313,1.563 3.625,1.76 0.313,0.198 10 false 2 4.563,1.552 4.875,1.75 0.313,0.198 10 false 1 4.552,0.833 4.865,1.031 0.313,0.198 10 false 3 3.49,0.927 4.094,1.156 0.604,0.229 10 false TWR+ 3.5,1.635 4.104,1.865 0.604,0.229 10 false TWR- 5.417,0.833 5.729,1.031 0.313,0.198 10 false 1 5.406,1.552 5.719,1.75 0.313,0.198 10 false 6 5.604,0.927 6.208,1.156 0.604,0.229 10 false FR+ 5.615,1.646 6.219,1.875 0.604,0.229 10 false FR- 2.969,1.948 3.573,2.177 0.604,0.229 10 false H130 2.969,2.115 5,2.365 2.031,0.25 10 false Wiring Harness Connector RH 0.844,3.208 1.156,3.406 0.313,0.198 10 false L2 0.844,3.385 2.135,3.75 1.292,0.365 10 false Front No. 1 Speaker Assembly LH 2.24,3.021 2.552,3.219 0.313,0.198 10 false 2 2.24,3.646 2.552,3.844 0.313,0.198 10 false 1 3.292,3.594 3.604,3.792 0.313,0.198 10 false 2 3.302,2.865 3.615,3.063 0.313,0.198 10 false 4 4.552,2.865 4.865,3.063 0.313,0.198 10 false 3 4.563,3.594 4.875,3.792 0.313,0.198 10 false 1 5.406,2.865 5.719,3.063 0.313,0.198 10 false 2 5.417,3.594 5.729,3.792 0.313,0.198 10 false 7 3.49,2.958 4.094,3.188 0.604,0.229 10 false TWL+ 3.5,3.688 4.104,3.917 0.604,0.229 10 false TWL- 4.354,0.927 4.667,1.125 0.313,0.198 10 false + 4.396,1.646 4.708,1.844 0.313,0.198 10 false - 4.375,2.969 4.688,3.167 0.313,0.198 10 false + 4.396,3.677 4.708,3.875 0.313,0.198 10 false - 3.031,3.969 3.635,4.198 0.604,0.229 10 false H129 3.031,4.135 5.063,4.385 2.031,0.25 10 false Wiring Harness Connector LH 5.615,2.948 6.219,3.177 0.604,0.229 10 false FL+ 5.615,3.667 6.219,3.896 0.604,0.229 10 false FL- 0.354,5.073 0.667,5.271 0.313,0.198 10 false M2 0.354,5.229 2.583,5.469 2.229,0.24 10 false Rear Speaker Assembly RH 2.24,5.479 2.552,5.677 0.313,0.198 10 false 1 2.229,4.865 2.542,5.063 0.313,0.198 10 false 2 5.417,4.708 5.74,4.958 0.323,0.25 10 false 4 5.406,5.406 5.729,5.656 0.323,0.25 10 false 9 5.604,4.792 6.208,5.021 0.604,0.229 10 false RR+ 5.615,5.51 6.219,5.74 0.604,0.229 10 false RR- 0.365,6.646 0.677,6.844 0.313,0.198 10 false N2 0.365,6.792 2.594,7.031 2.229,0.24 10 false Rear Speaker Assembly LH 2.229,6.385 2.542,6.583 0.313,0.198 10 false 2 2.25,6.99 2.563,7.188 0.313,0.198 10 false 1 5.417,6.229 5.74,6.479 0.323,0.25 10 false 3 5.406,6.958 5.729,7.208 0.323,0.25 10 false 8 5.594,6.323 6.198,6.552 0.604,0.229 10 false RL+ 5.615,7.031 6.219,7.26 0.604,0.229 10 false RL- 5.521,7.583 6.125,7.813 0.604,0.229 10 false H83 5.521,7.75 6.76,8.125 1.24,0.375 10 false Radio and Display Receiver Assembly

for 6 Speakers (w/ Telematics Transceiver for TMC Made)
E446026E01
5.427,0.854 5.583,1.052 0.156,0.198 10 false 1 3.583,0.865 3.74,1.063 0.156,0.198 10 false 4 4.885,0.875 5.042,1.073 0.156,0.198 10 false 3 4.667,0.875 4.823,1.073 0.156,0.198 10 false + 3.781,0.885 4.26,1.083 0.479,0.198 10 false TWR+ 5.594,0.99 6.073,1.188 0.479,0.198 10 false FR+ 2.604,1.052 2.76,1.25 0.156,0.198 10 false 2 0.406,1.073 0.667,1.281 0.26,0.208 10 false K2 0.396,1.26 2.531,1.469 2.135,0.208 10 false Front No. 1 Speaker Assembly RH 3.604,1.531 3.76,1.729 0.156,0.198 10 false 2 5.417,1.563 5.573,1.76 0.156,0.198 10 false 6 4.854,1.573 5.01,1.771 0.156,0.198 10 false 1 4.698,1.573 4.854,1.771 0.156,0.198 10 false - 3.781,1.563 4.26,1.76 0.479,0.198 10 false TWR- 2.604,1.594 2.76,1.792 0.156,0.198 10 false 1 5.583,1.677 6.063,1.875 0.479,0.198 10 false FR- 3.229,1.969 3.708,2.167 0.479,0.198 10 false H88 3.229,2.167 5.448,2.375 2.219,0.208 10 false Front No. 2 Speaker Assembly RH 3.594,2.729 3.75,2.927 0.156,0.198 10 false 3 5.406,2.698 5.563,2.896 0.156,0.198 10 false 2 3.104,2.74 3.26,2.938 0.156,0.198 10 false 3 4.885,2.708 5.042,2.906 0.156,0.198 10 false 1 1.802,2.708 1.958,2.906 0.156,0.198 10 false 4 2.01,2.75 2.49,2.948 0.479,0.198 10 false TWL+ 2.885,2.74 3.042,2.938 0.156,0.198 10 false + 4.479,2.823 4.833,3.021 0.354,0.198 10 false SPI+ 3.802,2.844 4.24,3.042 0.438,0.198 10 false SPO+ 5.604,2.844 5.958,3.042 0.354,0.198 10 false FL+ 5.604,3.563 5.958,3.76 0.354,0.198 10 false FL- 1.333,2.917 1.49,3.115 0.156,0.198 10 false 2 0.24,2.906 0.5,3.115 0.26,0.208 10 false L2 0.25,3.073 1.104,3.625 0.854,0.552 10 false Front No. 1 Speaker Assembly LH 5.427,3.427 5.583,3.625 0.156,0.198 10 false 7 3.594,3.427 3.75,3.625 0.156,0.198 10 false 4 3.073,3.417 3.229,3.615 0.156,0.198 10 false 1 4.875,3.417 5.031,3.615 0.156,0.198 10 false 2 1.802,3.427 1.958,3.625 0.156,0.198 10 false 2 2.01,3.417 2.49,3.615 0.479,0.198 10 false TWL- 2.906,3.448 3.063,3.646 0.156,0.198 10 false - 1.323,3.49 1.479,3.688 0.156,0.198 10 false 1 4.458,3.521 4.896,3.719 0.438,0.198 10 false SPI- 3.802,3.542 4.24,3.74 0.438,0.198 10 false SPO- 1.896,3.833 2.375,4.031 0.479,0.198 10 false H87 1.896,3.99 3.188,4.396 1.292,0.406 10 false Front No. 2 Speaker Assembly LH 3.667,3.854 4.146,4.052 0.479,0.198 10 false H84 3.667,4.031 5.104,4.271 1.438,0.24 10 false Telematics Transceiver 5.427,5.146 5.583,5.344 0.156,0.198 10 false 4 5.594,5.26 5.948,5.458 0.354,0.198 10 false RR+ 2.292,5.344 2.448,5.542 0.156,0.198 10 false 2 0.375,5.427 0.635,5.635 0.26,0.208 10 false M2 0.375,5.604 2.135,5.833 1.76,0.229 10 false Rear Speaker Assembly RH 5.417,5.865 5.573,6.063 0.156,0.198 10 false 9 2.292,5.896 2.448,6.094 0.156,0.198 10 false 1 5.594,5.958 5.948,6.156 0.354,0.198 10 false RR- 5.406,6.25 5.563,6.448 0.156,0.198 10 false 3 5.583,6.354 5.938,6.552 0.354,0.198 10 false RL+ 2.313,6.427 2.469,6.625 0.156,0.198 10 false 2 0.427,6.563 0.688,6.771 0.26,0.208 10 false N2 0.417,6.75 2.177,6.979 1.76,0.229 10 false Rear Speaker Assembly LH 5.417,6.938 5.573,7.135 0.156,0.198 10 false 8 5.594,7.063 5.948,7.26 0.354,0.198 10 false RL- 2.313,6.99 2.469,7.188 0.156,0.198 10 false 1 5.292,7.594 5.781,7.802 0.49,0.208 10 false H83 5.292,7.771 7,8.167 1.708,0.396 10 false Radio and Display Receiver Assembly

for 6 Speakers (w/o Telematics Transceiver for TMC Made)
E437700E01
5.563,7.844 6.823,8.323 1.26,0.479 10 false Radio and Display Receiver Assembly 5.615,1.344 6.073,1.542 0.458,0.198 10 false FR+ 5.625,2.042 6.083,2.24 0.458,0.198 10 false FR- 5.625,3.865 6.083,4.063 0.458,0.198 10 false FL- 5.625,3.167 6.083,3.365 0.458,0.198 10 false FL+ 5.615,4.833 6.073,5.031 0.458,0.198 10 false RR+ 5.625,5.531 6.083,5.729 0.458,0.198 10 false RR- 5.615,6.354 6.073,6.552 0.458,0.198 10 false RL+ 5.615,7.063 6.073,7.26 0.458,0.198 10 false RL- 5.563,7.625 6.021,7.823 0.458,0.198 10 false H83 5.385,6.927 5.604,7.125 0.219,0.198 10 false 8 5.385,6.219 5.604,6.417 0.219,0.198 10 false 3 5.385,5.406 5.604,5.604 0.219,0.198 10 false 9 5.385,4.708 5.604,4.906 0.219,0.198 10 false 4 2.292,4.885 2.51,5.083 0.219,0.198 10 false 2 2.292,5.49 2.51,5.688 0.219,0.198 10 false 1 2.292,6.427 2.51,6.625 0.219,0.198 10 false 2 2.292,6.99 2.51,7.188 0.219,0.198 10 false 1 2.281,3.219 2.5,3.417 0.219,0.198 10 false 2 2.281,3.771 2.5,3.969 0.219,0.198 10 false 1 3.292,3.031 3.51,3.229 0.219,0.198 10 false 4 3.302,3.74 3.521,3.938 0.219,0.198 10 false 2 4.583,3.031 4.802,3.229 0.219,0.198 10 false 3 4.583,3.75 4.802,3.948 0.219,0.198 10 false 1 5.396,3.021 5.615,3.219 0.219,0.198 10 false 2 5.396,3.729 5.615,3.927 0.219,0.198 10 false 7 3.479,3.063 3.938,3.26 0.458,0.198 10 false TWL+ 3.479,3.74 3.938,3.938 0.458,0.198 10 false TWL- 3.49,1.25 3.948,1.448 0.458,0.198 10 false TWR+ 3.479,1.948 3.938,2.146 0.458,0.198 10 false TWR- 3.292,1.219 3.51,1.417 0.219,0.198 10 false 4 3.302,1.948 3.521,2.146 0.219,0.198 10 false 2 4.594,1.219 4.813,1.417 0.219,0.198 10 false 3 4.594,1.938 4.813,2.135 0.219,0.198 10 false 1 4.375,1.25 4.594,1.448 0.219,0.198 10 false + 4.365,3.052 4.583,3.25 0.219,0.198 10 false + 4.396,1.927 4.615,2.125 0.219,0.198 10 false - 4.406,3.75 4.625,3.948 0.219,0.198 10 false - 5.396,1.229 5.615,1.427 0.219,0.198 10 false 1 5.396,1.938 5.615,2.135 0.219,0.198 10 false 6 3.146,2.323 3.604,2.521 0.458,0.198 10 false H88 3.146,2.5 5.51,2.771 2.365,0.271 10 false Front No. 2 Speaker Assembly RH 3.146,4.135 3.604,4.333 0.458,0.198 10 false H87 3.146,4.323 5.51,4.594 2.365,0.271 10 false Front No. 2 Speaker Assembly LH 2.292,1.406 2.51,1.604 0.219,0.198 10 false 2 2.302,1.958 2.521,2.156 0.219,0.198 10 false 1 0.896,1.458 1.354,1.656 0.458,0.198 10 false K2 0.896,1.646 2.188,2.104 1.292,0.458 10 false Front No. 1 Speaker Assembly RH 0.906,3.417 2.198,3.875 1.292,0.458 10 false Front No. 1 Speaker Assembly LH 0.906,3.25 1.365,3.448 0.458,0.198 10 false L2 0.406,5.177 2.375,5.448 1.969,0.271 10 false Rear Speaker Assembly RH 0.438,6.698 2.406,6.969 1.969,0.271 10 false Rear Speaker Assembly LH 0.406,5.01 0.865,5.208 0.458,0.198 10 false M2 0.438,6.531 0.896,6.729 0.458,0.198 10 false N2

for 8 Speakers
E445952E11
0.677,0.396 0.99,0.594 0.313,0.198 10 false K2 0.677,0.552 5.417,0.75 4.74,0.198 10 false Front No. 1 Speaker Assembly RH 2.979,0.208 3.292,0.406 0.313,0.198 10 false 2 2.99,0.781 3.302,0.979 0.313,0.198 10 false 1 5.354,0.125 5.667,0.323 0.313,0.198 10 false 10 5.375,0.635 5.688,0.833 0.313,0.198 10 false 25 0.677,1.417 0.99,1.615 0.313,0.198 10 false L2 0.677,1.583 5.417,1.781 4.74,0.198 10 false Front No. 1 Speaker Assembly LH 0.604,2.385 0.917,2.583 0.313,0.198 10 false H88 0.604,2.552 5.344,2.75 4.74,0.198 10 false Front No. 2 Speaker Assembly RH 0.604,3.406 0.917,3.604 0.313,0.198 10 false H87 0.604,3.573 5.344,3.771 4.74,0.198 10 false Front No. 2 Speaker Assembly LH 0.625,4.385 1.115,4.656 0.49,0.271 10 false H157 0.625,4.542 5.365,4.74 4.74,0.198 10 false Front No. 3 Speaker Assembly RH 0.573,5.333 1.063,5.604 0.49,0.271 10 false H158 0.583,5.5 5.323,5.698 4.74,0.198 10 false Front No. 3 Speaker Assembly LH 1.031,6.354 2.25,6.583 1.219,0.229 10 false M2 1.031,6.51 5.771,6.708 4.74,0.198 10 false Rear Speaker Assembly RH 1.094,7.354 2.573,7.646 1.479,0.292 10 false N2 1.094,7.51 3.229,7.719 2.135,0.208 10 false Rear Speaker Assembly LH 3.01,1.198 3.323,1.396 0.313,0.198 10 false 2 3,1.76 3.313,1.958 0.313,0.198 10 false 1 2.99,2.177 3.302,2.375 0.313,0.198 10 false 4 3,2.76 3.313,2.958 0.313,0.198 10 false 2 3,3.198 3.313,3.396 0.313,0.198 10 false 4 3,3.76 3.313,3.958 0.313,0.198 10 false 2 3,4.188 3.313,4.385 0.313,0.198 10 false 2 2.99,5.156 3.302,5.354 0.313,0.198 10 false 2 2.99,6.135 3.302,6.333 0.313,0.198 10 false 2 3.01,7.146 3.323,7.344 0.313,0.198 10 false 2 2.99,4.719 3.302,4.917 0.313,0.198 10 false 1 2.979,5.708 3.292,5.906 0.313,0.198 10 false 1 2.99,6.688 3.302,6.885 0.313,0.198 10 false 1 2.979,7.688 3.292,7.885 0.313,0.198 10 false 1 5.427,1.125 5.74,1.323 0.313,0.198 10 false 8 5.365,1.625 5.677,1.823 0.313,0.198 10 false 23 5.375,2.104 5.688,2.302 0.313,0.198 10 false 14 5.365,2.615 5.677,2.813 0.313,0.198 10 false 29 5.365,3.104 5.677,3.302 0.313,0.198 10 false 12 5.365,3.604 5.677,3.802 0.313,0.198 10 false 27 5.344,4.094 5.656,4.292 0.313,0.198 10 false 11 5.354,4.583 5.667,4.781 0.313,0.198 10 false 26 5.438,5.094 5.75,5.292 0.313,0.198 10 false 9 5.365,5.583 5.677,5.781 0.313,0.198 10 false 24 5.365,6.073 5.677,6.271 0.313,0.198 10 false 15 5.365,6.563 5.677,6.76 0.313,0.198 10 false 30 5.365,7.063 5.677,7.26 0.313,0.198 10 false 13 5.365,7.563 5.677,7.76 0.313,0.198 10 false 28 5.26,8 6.333,8.229 1.073,0.229 10 false H136 5.24,8.167 7.073,8.552 1.833,0.385 10 false Stereo Component Amplifier Assembly 5.604,0.219 6.219,0.417 0.615,0.198 10 false WFR+ 5.604,0.698 6.219,0.896 0.615,0.198 10 false WFR- 5.604,1.198 6.219,1.396 0.615,0.198 10 false WFL+ 5.604,1.688 6.219,1.885 0.615,0.198 10 false WFL- 5.604,2.188 6.219,2.385 0.615,0.198 10 false TWR+ 5.615,2.688 6.229,2.885 0.615,0.198 10 false TWR- 5.604,3.177 6.219,3.375 0.615,0.198 10 false TWL+ 5.594,3.677 6.208,3.875 0.615,0.198 10 false TWL- 5.604,4.167 6.219,4.365 0.615,0.198 10 false FR+ 5.604,4.667 6.219,4.865 0.615,0.198 10 false FR- 5.604,5.167 6.219,5.365 0.615,0.198 10 false FL+ 5.604,5.656 6.219,5.854 0.615,0.198 10 false FL- 5.604,6.167 6.219,6.365 0.615,0.198 10 false RR+ 5.604,6.646 6.219,6.844 0.615,0.198 10 false RR- 5.615,7.135 6.229,7.333 0.615,0.198 10 false RL+ 5.604,7.635 6.219,7.833 0.615,0.198 10 false RL-

CAUTION / NOTICE / HINT

NOTICE:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type without TAS Type)>PRECAUTION


PROCEDURE

1.CHECK MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for 2 Speakers A
for 4 Speakers B
for 6 Speakers C
for 8 Speakers D



A

2.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY OR WIRING HARNESS CONNECTOR - BODY GROUND)

B

4.CHECK SPEAKER (OPERATION CHECK)

C

9.CHECK MODEL

D

26.CHECK SPEAKER (OPERATION CHECK)
2.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY OR WIRING HARNESS CONNECTOR - BODY GROUND)
a.

Disconnect the H83 radio and display receiver assembly connectors.


b.

Disconnect the K2 and L2 front No. 1 speaker assembly connectors.


c.

Disconnect the H129 and H130 wiring harness connector connectors.


d.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H83,H130,H129,K2,L2)Location & Routing

Click Connector(H83)Instrument Panel>Instrument Panel Wire / Speaker Wire>Radio & Display Receiver Assembly

Click Connector(H130)Instrument Panel>Instrument Panel Wire / Speaker Wire>Wiring Harness Connector RH

Click Connector(H129)Instrument Panel>Instrument Panel Wire / Speaker Wire>Wiring Harness Connector LH

Click Connector(K2)Body>Front Door Wire RH / Television Camera Wire>Front No. 1 Speaker Assembly RH

Click Connector(L2)Body>Front Door Wire LH / Television Camera Wire>Front No. 1 Speaker Assembly LH

H83-1 (FR+) - H130-3 (+) Always Below 1 Ω
H83-6 (FR-) - H130-1 (-) Always Below 1 Ω
H83-2 (FL+) - H129-3 (+) Always Below 1 Ω
H83-7 (FL-) - H129-1 (-) Always Below 1 Ω
H130-4 (TWR+) - K2-2 Always Below 1 Ω
H130-2 (TWR-) - K2-1 Always Below 1 Ω
H129-4 (TWL+) - L2-2 Always Below 1 Ω
H129-2 (TWL-) - L2-1 Always Below 1 Ω
H83-1 (FR+) or H130-3 (+) - Body ground Always 10 kΩ or higher
H83-6 (FR-) or H130-1 (-) - Body ground Always 10 kΩ or higher
H83-2 (FL+) or H129-3 (+) - Body ground Always 10 kΩ or higher
H83-7 (FL-) or H129-1 (-) - Body ground Always 10 kΩ or higher
H130-4 (TWR+) or K2-2 - Body ground Always 10 kΩ or higher
H130-2 (TWR-) or K2-1 - Body ground Always 10 kΩ or higher
H129-4 (TWL+) or L2-2 - Body ground Always 10 kΩ or higher
H129-2 (TWL-) or L2-1 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

3.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

OK

END

NG

4.CHECK SPEAKER (OPERATION CHECK)
a.
E268474

Enter the "System Check Mode" screen. Refer to Check Speaker in Operation Check.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type without TAS Type)>OPERATION CHECK


b.

Perform the operation check above and determine the speaker that is not operating.

Result:
Not Operating Speaker Proceed to
Front No. 1 speaker assembly A
Rear speaker assembly B


HINT:

If sound cannot be heard from any speaker, inspect all of them.




A

5.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - FRONT NO. 1 SPEAKER ASSEMBLY - WIRING HARNESS CONNECTOR)

B

7.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - REAR SPEAKER ASSEMBLY)
5.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - FRONT NO. 1 SPEAKER ASSEMBLY - WIRING HARNESS CONNECTOR)
a.

Disconnect the H83 radio and display receiver assembly connector.


b.

Disconnect the K2 and L2 front No. 1 speaker assembly connectors.


c.

Disconnect the H130 and H129 wiring harness connector connectors.


d.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H83,H130,H129,K2,L2)Location & Routing

Click Connector(H83)Instrument Panel>Instrument Panel Wire / Speaker Wire>Radio & Display Receiver Assembly

Click Connector(H130)Instrument Panel>Instrument Panel Wire / Speaker Wire>Wiring Harness Connector RH

Click Connector(H129)Instrument Panel>Instrument Panel Wire / Speaker Wire>Wiring Harness Connector LH

Click Connector(K2)Body>Front Door Wire RH / Television Camera Wire>Front No. 1 Speaker Assembly RH

Click Connector(L2)Body>Front Door Wire LH / Television Camera Wire>Front No. 1 Speaker Assembly LH

H83-1 (FR+) - H130-3 (+) Always Below 1 Ω
H83-6 (FR-) - H130-1 (-) Always Below 1 Ω
H83-2 (FL+) - H129-3 (+) Always Below 1 Ω
H83-7 (FL-) - H129-1 (-) Always Below 1 Ω
H130-4 (TWR+) - K2-2 Always Below 1 Ω
H130-2 (TWR-) - K2-1 Always Below 1 Ω
H129-4 (TWL+) - L2-2 Always Below 1 Ω
H129-2 (TWL-) - L2-1 Always Below 1 Ω
H83-1 (FR+) or H130-3 (+) - Body ground Always 10 kΩ or higher
H83-6 (FR-) or H130-1 (-) - Body ground Always 10 kΩ or higher
H83-2 (FL+) or H129-3 (+) - Body ground Always 10 kΩ or higher
H83-7 (FL-) or H129-1 (-) - Body ground Always 10 kΩ or higher
H130-4 (TWR+) or K2-2 - Body ground Always 10 kΩ or higher
H130-2 (TWR-) or K2-1 - Body ground Always 10 kΩ or higher
H129-4 (TWL+) or L2-2 - Body ground Always 10 kΩ or higher
H129-2 (TWL-) or L2-1 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

6.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

6.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

OK

END

NG

7.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - REAR SPEAKER ASSEMBLY)
a.

Disconnect the H83 radio and display receiver assembly connector.


b.

Disconnect the M2 and N2 rear speaker assembly connectors.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H83,M2,N2)Location & Routing

Click Connector(H83)Instrument Panel>Instrument Panel Wire / Speaker Wire>Radio & Display Receiver Assembly

Click Connector(M2)Body>No. 1 Rear Door Wire>Rear Speaker Assembly RH

Click Connector(N2)Body>No. 2 Rear Door Wire>Rear Speaker Assembly LH

H83-4 (RR+) - M2-2 Always Below 1 Ω
H83-9 (RR-) - M2-1 Always Below 1 Ω
H83-3 (RL+) - N2-2 Always Below 1 Ω
H83-8 (RL-) - N2-1 Always Below 1 Ω
H83-4 (RR+) or M2-2 - Body ground Always 10 kΩ or higher
H83-9 (RR-) or M2-1 - Body ground Always 10 kΩ or higher
H83-3 (RL+) or N2-2 - Body ground Always 10 kΩ or higher
H83-8 (RL-) or N2-1 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

8.INSPECT REAR SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

8.INSPECT REAR SPEAKER ASSEMBLY

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>INSPECTION

OK:

Malfunction disappears.


Result:
Proceed to
OK
NG



OK

END

NG

9.CHECK MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
w/ Telematics Transceiver for TMC Made A
w/o Telematics Transceiver for TMC Made B



A

10.CHECK SPEAKER (OPERATION CHECK)

B

20.CHECK SPEAKER (OPERATION CHECK)
10.CHECK SPEAKER (OPERATION CHECK)
a.
E268474

Enter the "System Check Mode" screen. Refer to Check Speaker in Operation Check.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type without TAS Type)>OPERATION CHECK


b.

Perform the operation check above and determine the speaker that is not operating.

Result:
Not Operating Speaker Proceed to
Front No. 1 speaker assembly or front No. 2 speaker assembly A
Rear speaker assembly B


HINT:

If sound cannot be heard from any speaker, inspect all of them.




A

11.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - TELEMATICS TRANSCEIVER)

B

18.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - REAR SPEAKER ASSEMBLY)
11.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - TELEMATICS TRANSCEIVER)
a.

Disconnect the H83 radio and display receiver assembly connector.


b.

Disconnect the H84 telematics transceiver connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H83,H84)Location & Routing

Click Connector(H83)Instrument Panel>Instrument Panel Wire / Speaker Wire>Radio & Display Receiver Assembly

Click Connector(H84)Instrument Panel>Instrument Panel Wire / Speaker Wire>Telematics Transceiver

H83-2 (FL+) - H84-1 (SPI+) Always Below 1 Ω
H83-7 (FL-) - H84-2 (SPI-) Always Below 1 Ω
H83-2 (FL+) or H84-1 (SPI+) - Body ground Always 10 kΩ or higher
H83-7 (FL-) or H84-2 (SPI-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

12.CHECK HARNESS AND CONNECTOR (TELEMATICS TRANSCEIVER - FRONT NO. 2 SPEAKER ASSEMBLY LH)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

12.CHECK HARNESS AND CONNECTOR (TELEMATICS TRANSCEIVER - FRONT NO. 2 SPEAKER ASSEMBLY LH)
a.

Disconnect the H84 telematics transceiver connector.


b.

Disconnect the H87 front No. 2 speaker assembly LH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H84,H87)Location & Routing

Click Connector(H84)Instrument Panel>Instrument Panel Wire / Speaker Wire>Telematics Transceiver

Click Connector(H87)Instrument Panel>Instrument Panel Wire / Speaker Wire>Front No. 2 Speaker Assembly LH

H84-3 (SPO+) - H87-3 (+) Always Below 1 Ω
H84-4 (SPO-) - H87-1 (-) Always Below 1 Ω
H84-3 (SPO+) or H87-3 (+) - Body ground Always 10 kΩ or higher
H84-4 (SPO-) or H87-1 (-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

13.INSPECT TELEMATICS TRANSCEIVER

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

13.INSPECT TELEMATICS TRANSCEIVER

b.
E422225C39
1.438,1.063 1.854,1.313 0.417,0.25 1.802,1.813 2.271,1.667 true 1.802,2.031 2.125,2.417 true 1.552,2.052 1.219,2.406 true 1.531,1.792 1.083,1.604 true 2.302,1.573 2.667,1.792 0.365,0.219 10 false SPI+ 0.729,1.521 1.104,1.688 0.375,0.167 10 false SPI- 2.177,2.344 2.667,2.51 0.49,0.167 10 false SPO+ 0.76,2.323 1.229,2.542 0.469,0.219 10 false SPO- 0.167,0.177 0.448,0.417 0.281,0.24 10 false *a 1.521,1.104 1.885,1.323 0.365,0.219 10 false H84
*a Component without harness connected
(Telematics Transceiver)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H84)Location & Routing

Click Connector(H84)Instrument Panel>Instrument Panel Wire / Speaker Wire>Telematics Transceiver

H84-1 (SPI+) - H84-3 (SPO+) Always Below 1 Ω
H84-2 (SPI-) - H84-4 (SPO-) Always Below 1 Ω
H84-1 (SPI+) - H84-2 (SPI-) Always 10 kΩ or higher
H84-3 (SPO+) - H84-4 (SPO-) Always 10 kΩ or higher
H84-1 (SPI+) or H84-3 (SPO+) - Body ground Always 10 kΩ or higher
H84-2 (SPI-) or H84-4 (SPO-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

14.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY RH)

NG

14.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY RH)
a.

Disconnect the H83 radio and display receiver assembly connector.


b.

Disconnect the H88 front No. 2 speaker assembly RH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H83,H88)Location & Routing

Click Connector(H83)Instrument Panel>Instrument Panel Wire / Speaker Wire>Radio & Display Receiver Assembly

Click Connector(H88)Instrument Panel>Instrument Panel Wire / Speaker Wire>Front No. 2 Speaker Assembly RH

H83-1 (FR+) - H88-3 (+) Always Below 1 Ω
H83-6 (FR-) - H88-1 (-) Always Below 1 Ω
H83-1 (FR+) or H88-3 (+) - Body ground Always 10 kΩ or higher
H83-6 (FR-) or H88-1 (-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

15.CHECK HARNESS AND CONNECTOR (FRONT NO. 1 SPEAKER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

15.CHECK HARNESS AND CONNECTOR (FRONT NO. 1 SPEAKER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)
a.

Disconnect the K2 and L2 front No. 1 speaker assembly connectors.


b.

Disconnect the H88 and H87 front No. 2 speaker assembly connectors.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H88,K2,H87,L2)Location & Routing

Click Connector(H88)Instrument Panel>Instrument Panel Wire / Speaker Wire>Front No. 2 Speaker Assembly RH

Click Connector(K2)Body>Front Door Wire RH / Television Camera Wire>Front No. 1 Speaker Assembly RH

Click Connector(H87)Instrument Panel>Instrument Panel Wire / Speaker Wire>Front No. 2 Speaker Assembly LH

Click Connector(L2)Body>Front Door Wire LH / Television Camera Wire>Front No. 1 Speaker Assembly LH

H88-4 (TWR+) - K2-2 Always Below 1 Ω
H88-2 (TWR-) - K2-1 Always Below 1 Ω
H87-4 (TWL+) - L2-2 Always Below 1 Ω
H87-2 (TWL-) - L2-1 ground Always Below 1 Ω
H88-4 (TWR+) or K2-2 - Body ground Always 10 kΩ or higher
H88-2 (TWR-) or K2-1 - Body ground Always 10 kΩ or higher
H87-4 (TWL+) or L2-2 - Body ground Always 10 kΩ or higher
H87-2 (TWL-) or L2-1 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

16.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

16.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

OK

17.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

17.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

OK

END

NG

REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

18.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - REAR SPEAKER ASSEMBLY)
a.

Disconnect the H83 radio and display receiver assembly connector.


b.

Disconnect the M2 and N2 rear speaker assembly connectors.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H83,M2,N2)Location & Routing

Click Connector(H83)Instrument Panel>Instrument Panel Wire / Speaker Wire>Radio & Display Receiver Assembly

Click Connector(M2)Body>No. 1 Rear Door Wire>Rear Speaker Assembly RH

Click Connector(N2)Body>No. 2 Rear Door Wire>Rear Speaker Assembly LH

H83-4 (RR+) - M2-2 Always Below 1 Ω
H83-9 (RR-) - M2-1 Always Below 1 Ω
H83-3 (RL+) - N2-2 Always Below 1 Ω
H83-8 (RL-) - N2-1 Always Below 1 Ω
H83-4 (RR+) or M2-2 - Body ground Always 10 kΩ or higher
H83-9 (RR-) or M2-1 - Body ground Always 10 kΩ or higher
H83-3 (RL+) or N2-2 - Body ground Always 10 kΩ or higher
H83-8 (RL-) or N2-1 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

19.INSPECT REAR SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

19.INSPECT REAR SPEAKER ASSEMBLY

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>INSPECTION

OK:

Malfunction disappears.


Result:
Proceed to
OK
NG



OK

END

NG

20.CHECK SPEAKER (OPERATION CHECK)
a.
E268474

Enter the "System Check Mode" screen. Refer to Check Speaker in Operation Check.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type without TAS Type)>OPERATION CHECK


b.

Perform the operation check above and determine the speaker that is not operating.

Result:
Not Operating Speaker Proceed to
Front No. 1 speaker assembly or front No. 2 speaker assembly A
Rear speaker assembly B


HINT:

If sound cannot be heard from any speaker, inspect all of them.




A

21.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - FRONT NO. 1 SPEAKER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)

B

24.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - REAR SPEAKER ASSEMBLY)
21.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - FRONT NO. 1 SPEAKER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)
a.

Disconnect the H83 radio and display receiver assembly connector.


b.

Disconnect the K2 and L2 front No. 1 speaker assembly connectors.


c.

Disconnect the H88 and H87 front No. 2 speaker assembly connectors.


d.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H83,H88,H87,K2,L2)Location & Routing

Click Connector(H83)Instrument Panel>Instrument Panel Wire / Speaker Wire>Radio & Display Receiver Assembly

Click Connector(H88)Instrument Panel>Instrument Panel Wire / Speaker Wire>Front No. 2 Speaker Assembly RH

Click Connector(H87)Instrument Panel>Instrument Panel Wire / Speaker Wire>Front No. 2 Speaker Assembly LH

Click Connector(K2)Body>Front Door Wire RH / Television Camera Wire>Front No. 1 Speaker Assembly RH

Click Connector(L2)Body>Front Door Wire LH / Television Camera Wire>Front No. 1 Speaker Assembly LH

H83-1 (FR+) - H88-3 (+) Always Below 1 Ω
H83-6 (FR-) - H88-1 (-) Always Below 1 Ω
H83-2 (FL+) - H87-3 (+) Always Below 1 Ω
H83-7 (FL-) - H87-1 (-) Always Below 1 Ω
H88-4 (TWR+) - K2-2 Always Below 1 Ω
H88-2 (TWR-) - K2-1 Always Below 1 Ω
H87-4 (TWL+) - L2-2 Always Below 1 Ω
H87-2 (TWL-) - L2-1 Always Below 1 Ω
H83-1 (FR+) or H88-3 (+) - Body ground Always 10 kΩ or higher
H83-6 (FR-) or H88-1 (-) - Body ground Always 10 kΩ or higher
H83-2 (FL+) or H87-3 (+) - Body ground Always 10 kΩ or higher
H83-7 (FL-) or H87-1 (-) - Body ground Always 10 kΩ or higher
H88-4 (TWR+) or K2-2 - Body ground Always 10 kΩ or higher
H88-2 (TWR-) or K2-1 - Body ground Always 10 kΩ or higher
H87-4 (TWL+) or L2-2 - Body ground Always 10 kΩ or higher
H87-2 (TWL-) or L2-1 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

22.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

22.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

OK

23.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

23.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>PILLAR SPEAKER>INSPECTION

OK:

Malfunction disappears.


Result:
Proceed to
OK
NG



OK

END

NG

24.CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - REAR SPEAKER ASSEMBLY)
a.

Disconnect the H83 radio and display receiver assembly connector.


b.

Disconnect the M2 and N2 rear speaker assembly connectors.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H83,M2,N2)Location & Routing

Click Connector(H83)Instrument Panel>Instrument Panel Wire / Speaker Wire>Radio & Display Receiver Assembly

Click Connector(M2)Body>No. 1 Rear Door Wire>Rear Speaker Assembly RH

Click Connector(N2)Body>No. 2 Rear Door Wire>Rear Speaker Assembly LH

H83-4 (RR+) - M2-2 Always Below 1 Ω
H83-9 (RR-) - M2-1 Always Below 1 Ω
H83-3 (RL+) - N2-2 Always Below 1 Ω
H83-8 (RL-) - N2-1 Always Below 1 Ω
H83-4 (RR+) or M2-2 - Body ground Always 10 kΩ or higher
H83-9 (RR-) or M2-1 - Body ground Always 10 kΩ or higher
H83-3 (RL+) or N2-2 - Body ground Always 10 kΩ or higher
H83-8 (RL-) or N2-1 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

25.INSPECT REAR SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

25.INSPECT REAR SPEAKER ASSEMBLY

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>INSPECTION

OK:

Malfunction disappears.


Result:
Proceed to
OK
NG



OK

END

NG

26.CHECK SPEAKER (OPERATION CHECK)
a.
E268474

Enter the "System Check Mode" screen. Refer to Check Speaker in Operation Check.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type without TAS Type)>OPERATION CHECK


b.

Perform the operation check above and determine the speaker that is not operating.

Result:
Not Operating Speaker Proceed to
Front No. 1 speaker assembly A
Front No. 2 speaker assembly B
Front No. 3 speaker assembly C
Rear speaker assembly D


HINT:

If sound cannot be heard from any speaker, inspect all of them.




A

27.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - FRONT NO. 1 SPEAKER ASSEMBLY)

B

29.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)

C

31.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - FRONT NO. 3 SPEAKER ASSEMBLY)

D

33.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - REAR SPEAKER ASSEMBLY)
27.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - FRONT NO. 1 SPEAKER ASSEMBLY)
a.

Disconnect the H136 stereo component amplifier assembly connector.


b.

Disconnect the K2 and L2 front No. 1 speaker assembly connectors.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H136,K2,L2)Location & Routing

Click Connector(H136)Instrument Panel>Instrument Panel Wire / Speaker Wire>Stereo Component Amplifier Assembly

Click Connector(K2)Body>Front Door Wire RH / Television Camera Wire>Front No. 1 Speaker Assembly RH

Click Connector(L2)Body>Front Door Wire LH / Television Camera Wire>Front No. 1 Speaker Assembly LH

H136-10 (WFR+) - K2-2 Always Below 1 Ω
H136-25 (WFR-) - K2-1 Always Below 1 Ω
H136-8 (WFL+) - L2-2 Always Below 1 Ω
H136-23 (WFL-) - L2-1 Always Below 1 Ω
H136-10 (WFR+) or K2-2 - Body ground Always 10 kΩ or higher
H136-25 (WFR-) or K2-1 - Body ground Always 10 kΩ or higher
H136-8 (WFL+) or L2-2 - Body ground Always 10 kΩ or higher
H136-23 (WFL-) or L2-1 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

28.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

28.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

OK

END

NG

29.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)
a.

Disconnect the H136 stereo component amplifier assembly connector.


b.

Disconnect the H88 and H87 front No. 2 speaker assembly connectors.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H136,H88,H87)Location & Routing

Click Connector(H136)Instrument Panel>Instrument Panel Wire / Speaker Wire>Stereo Component Amplifier Assembly

Click Connector(H88)Instrument Panel>Instrument Panel Wire / Speaker Wire>Front No. 2 Speaker Assembly RH

Click Connector(H87)Instrument Panel>Instrument Panel Wire / Speaker Wire>Front No. 2 Speaker Assembly LH

H136-14 (TWR+) - H88-4 Always Below 1 Ω
H136-29 (TWR-) - H88-2 Always Below 1 Ω
H136-12 (TWL+) - H87-4 Always Below 1 Ω
H136-27 (TWL-) - H87-2 Always Below 1 Ω
H136-14 (TWR+) or H88-4 - Body ground Always 10 kΩ or higher
H136-29 (TWR-) or H88-2 - Body ground Always 10 kΩ or higher
H136-12 (TWL+) or H87-4 - Body ground Always 10 kΩ or higher
H136-27 (TWL-) or H87-2 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

30.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

30.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>PILLAR SPEAKER>INSPECTION

OK:

Malfunction disappears.


Result:
Proceed to
OK
NG



OK

END

NG

31.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - FRONT NO. 3 SPEAKER ASSEMBLY)
a.

Disconnect the H136 stereo component amplifier assembly connector.


b.

Disconnect the H158 and H157 front No. 3 speaker assembly connectors.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H136,H157,H158)Location & Routing

Click Connector(H136)Instrument Panel>Instrument Panel Wire / Speaker Wire>Stereo Component Amplifier Assembly

Click Connector(H157)Instrument Panel>Instrument Panel Wire / Speaker Wire>No. 3 Front Speaker Assembly RH

Click Connector(H158)Instrument Panel>Instrument Panel Wire / Speaker Wire>No. 3 Front Speaker Assembly LH

H136-11 (FR+) - H157-2 Always Below 1 Ω
H136-26 (FR-) - H157-1 Always Below 1 Ω
H136-9 (FL+) - H158-2 Always Below 1 Ω
H136-24 (FL-) - H158-1 Always Below 1 Ω
H136-11 (FR+) or H157-2 - Body ground Always 10 kΩ or higher
H136-26 (FR-) or H157-1 - Body ground Always 10 kΩ or higher
H136-9 (FL+) or H158-2 - Body ground Always 10 kΩ or higher
H136-24 (FL-) or H158-1 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

32.INSPECT FRONT NO. 3 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

32.INSPECT FRONT NO. 3 SPEAKER ASSEMBLY

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>INSPECTION

OK:

Malfunction disappears.


Result:
Proceed to
OK
NG



OK

END

NG

33.CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER ASSEMBLY - REAR SPEAKER ASSEMBLY)
a.

Disconnect the H136 stereo component amplifier assembly connector.


b.

b. Disconnect the M2 and N2 rear speaker assembly connectors.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(H136,M2,N2)Location & Routing

Click Connector(H136)Instrument Panel>Instrument Panel Wire / Speaker Wire>Stereo Component Amplifier Assembly

Click Connector(M2)Body>No. 1 Rear Door Wire>Rear Speaker Assembly RH

Click Connector(N2)Body>No. 2 Rear Door Wire>Rear Speaker Assembly LH

H136-15 (RR+) - M2-2 Always Below 1 Ω
H136-30 (RR-) - M2-1 Always Below 1 Ω
H136-13 (RL+) - N2-2 Always Below 1 Ω
H136-28 (RL-) - N2-1 Always Below 1 Ω
H136-15 (RR+) or M2-2 - Body ground Always 10 kΩ or higher
H136-30 (RR-) or M2-1 - Body ground Always 10 kΩ or higher
H136-13 (RL+) or N2-2 - Body ground Always 10 kΩ or higher
H136-28 (RL-) or N2-1 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

34.INSPECT REAR SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

34.INSPECT REAR SPEAKER ASSEMBLY

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>INSPECTION

OK:

Malfunction disappears.


Result:
Proceed to
OK
NG



OK

END

NG