| *A | for Driver Seat | *B | for Front Passenger Seat |
| *C | w/ Under Tray | - | - |
| *1 | FRONT SEAT BELT ANCHOR PLATE | - | - |
|
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | - | - |
Use the same procedure for RHD and LHD.
The following procedure is for LHD.
Use the same procedure for the driver seat and front passenger seat.
The procedure listed below is for the driver seat.
73240
1.INSTALL FRONT SEAT INNER BELT ASSEMBLY
for Driver Side Manual Seat:
| *a | Protruding Part | - | - |
Install the front seat belt anchor plate.
Install the front seat inner belt assembly with the nut.
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the separate type front seat cushion spring assembly.
Engage the clamps.
Engage the clamp and claw.
for Driver Side Power Seat:
| *a | Protruding Part | - | - |
Install the front seat belt anchor plate.
Install the front seat inner belt assembly with the nut.
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the separate type front seat cushion spring assembly.
Engage the clamp.
Engage the clamp and claw.
for Front Passenger Seat:
| *a | Protruding Part | - | - |
Install the front seat belt anchor plate.
Install the front seat inner belt assembly with the nut.
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the separate type front seat cushion spring assembly.
Engage the clamp.
Engage the clamps and claw.
Connect the connector.
73508A
2.INSTALL NO. 2 FRONT SEAT UNDER TRAY RAIL SUB-ASSEMBLY (w/ Under Tray)
72925
3.INSTALL FRONT SEAT CUSHION COVER (w/ Under Tray)