Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM (w/o Adaptive High Beam System) › from 2021.07
RM3700E _59 Vehicle Exterior _093283 LIGHTING (EXT) _0486938 LIGHTING SYSTEM(w/o Adaptive High Beam System) J

LIGHTING (EXT)  LIGHTING SYSTEM(w/o Adaptive High Beam System)  Front Fog Light Circuit  


DESCRIPTION

The main body ECU (multiplex network body ECU) controls the front fog lights.

WIRING DIAGRAM

E439567E09
0.469,1.427 2.104,1.885 1.635,0.458 10 false Main Body ECU (Multiplex Network Body ECU) 5.583,2.583 6.396,2.885 0.813,0.302 10 false IPD 6.323,1.698 6.688,1.948 0.365,0.25 10 false CPU 5.26,4.771 5.833,5.031 0.573,0.26 10 false A86 5.271,4.927 6.646,5.469 1.375,0.542 10 false Semiconductor Power Integration Computer 0.635,5.438 2.833,5.688 2.198,0.25 10 false : CXPI Communication Line 5.021,4.031 5.406,4.302 0.385,0.271 10 false L 5,2.458 5.385,2.729 0.385,0.271 10 false L 4.708,2.458 5.094,2.729 0.385,0.271 10 false 18 4.719,4.031 5.104,4.302 0.385,0.271 10 false 17 2.896,4.031 3.281,4.302 0.385,0.271 10 false 1 2.656,4.156 3.042,4.427 0.385,0.271 10 false B 1.406,4.156 1.792,4.427 0.385,0.271 10 false E 1.417,2.573 1.802,2.844 0.385,0.271 10 false E 2.667,2.583 3.052,2.854 0.385,0.271 10 false B 2.885,2.469 3.271,2.74 0.385,0.271 10 false 1 1.198,2.469 1.583,2.74 0.385,0.271 10 false 2 1.177,4.042 1.563,4.313 0.385,0.271 10 false 2 1.333,3.208 3.198,3.406 1.865,0.198 10 false A14 1.333,3.385 3.198,3.583 1.865,0.198 10 false Front Fog Light Assembly LH 1.302,4.781 3.167,4.979 1.865,0.198 10 false A15 1.302,4.948 3.167,5.146 1.865,0.198 10 false Front Fog Light Assembly RH 1.833,2.646 2.49,2.865 0.656,0.219 10 false Fog Light 1.781,4.229 2.438,4.448 0.656,0.219 10 false Fog Light 5.229,0.698 5.969,1.26 0.74,0.563 10 false CXPI Transceiver

CAUTION / NOTICE / HINT

NOTICE:
·

Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.*1

·

First, confirm that there is no malfunction in the power integration system. Refer to the How to Proceed with Troubleshooting procedure.

Click herePower Source / Network>POWER DISTRIBUTION>POWER INTEGRATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

·

First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CAN communication malfunctions before troubleshooting this symptom.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (w/o Adaptive High Beam System)>HOW TO PROCEED WITH TROUBLESHOOTING

·

First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CXPI communication malfunctions before troubleshooting this symptom.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM (w/o Adaptive High Beam System)>HOW TO PROCEED WITH TROUBLESHOOTING

*1: w/ Entry and Start System




PROCEDURE

1.READ VALUE USING GTS
a.

Turn the light control switch to the TAIL position.


b.

Turn the front fog light switch on.


c.

Using the GTS, read the Data List.

Body Electrical > Power Integration No.1 > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Front Fog Light Fuse Shut Off Status Front fog light fuse condition OFF or ON OFF: Front fog light fuse not shut off
ON: Front fog light fuse shut off
·

Light control switch in tail position

·

w/ Front Fog Light


Body Electrical > Power Integration No.1 > Data List
Tester Display
Front Fog Light Fuse Shut Off Status
50003 473 417
OK:

The Data List value displays "OFF".



Result:
Proceed to
OK
NG



OK

2.READ VALUE USING GTS

NG

3.INSPECT FRONT FOG LIGHT ASSEMBLY LH
2.READ VALUE USING GTS
a.

Using the GTS, read the Data List.

Body Electrical > Power Integration No.1 > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Front Fog Light Output Signal Front fog light output OFF or ON OFF: Front fog light is not output
ON: Front fog light is output
·

Light control switch in tail position

·

w/ Front Fog Light


Body Electrical > Power Integration No.1 > Data List
Tester Display
Front Fog Light Output Signal
50003 473 415
OK:

Display changes according to the front fog light switch operation.



Result:
Proceed to
OK
NG



OK

REPLACE SEMICONDUCTOR POWER INTEGRATION ECU

NG

3.INSPECT FRONT FOG LIGHT ASSEMBLY LH
a.

Disconnect the A14 front fog light assembly LH connector.


b.

Turn the front fog light switch off.


c.

Turn the front fog light switch on.


d.

Using the GTS, read the Data List.

Body Electrical > Power Integration No.1 > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Front Fog Light Fuse Shut Off Status Front fog light fuse condition OFF or ON OFF: Front fog light fuse not shut off
ON: Front fog light fuse shut off
·

Light control switch in tail position

·

w/ Front Fog Light


OK:

The Data List value displays "OFF".



Result:
Proceed to
OK
NG



OK

REPLACE FRONT FOG LIGHT ASSEMBLY LH

NG

4.INSPECT FRONT FOG LIGHT ASSEMBLY RH
4.INSPECT FRONT FOG LIGHT ASSEMBLY RH
a.

Disconnect the A15 front fog light assembly RH connector.


b.

Turn the front fog light switch off.


c.

Turn the front fog light switch on.


d.

Using the GTS, read the Data List.

Body Electrical > Power Integration No.1 > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Front Fog Light Fuse Shut Off Status Front fog light fuse condition OFF or ON OFF: Front fog light fuse not shut off
ON: Front fog light fuse shut off
·

Light control switch in tail position

·

w/ Front Fog Light


OK:

The Data List value displays "OFF".



Result:
Proceed to
OK
NG



OK

REPLACE FRONT FOG LIGHT ASSEMBLY RH

NG

5.CHECK HARNESS AND CONNECTOR
5.CHECK HARNESS AND CONNECTOR
a.

Disconnect the A14 front fog light assembly LH connector.


b.

Disconnect the A15 front fog light assembly RH connector.


c.

Disconnect the cable from the negative (-) auxiliary battery terminal.


d.

Disconnect the A86 semiconductor power integration computer connector.


e.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(A14,A86,A15)Location & Routing

Click Connector(A14)Engine Compartment>Engine Room Main Wire>Front Fog Light LH

Click Connector(A86)Engine Compartment>Engine Room Main Wire>Semiconductor Power Integration ECU

Click Connector(A15)Engine Compartment>Engine Room Main Wire>Front Fog Light RH

A14-1 (B) - Body ground Always 10 kΩ or higher
A86-18 (L) - Body ground Always 10 kΩ or higher
A15-1 (B) - Body ground Always 10 kΩ or higher
A86-17 (L) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE SEMICONDUCTOR POWER INTEGRATION ECU

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR