Home › Engine / Hybrid System › 1NZ-FE INTAKE / EXHAUST › EXHAUST PIPE › 2011.08–2016.09
RM19S0E _51 Engine / Hybrid System _051456 1NZ-FE INTAKE / EXHAUST _0248114 EXHAUST PIPE A

1NZ-FE INTAKE / EXHAUST  EXHAUST PIPE  REMOVAL  


PROCEDURE

Hide 89465A 1.REMOVE HEATED OXYGEN SENSOR (for Sensor 2)

Hide 57533B 2.REMOVE FRONT FLOOR CENTER BRACE (w/ Side Mudguard)

Hide 17430 3.REMOVE TAIL EXHAUST PIPE ASSEMBLY

a.
A247550

Remove the 2 bolts and 2 springs, and separate the tail exhaust pipe assembly from the front exhaust pipe assembly.


b.

Remove the 2 exhaust pipe supports and the tail exhaust pipe assembly.


c.

Remove the gasket from the front exhaust pipe assembly.


Hide 17410 5.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.
A247548

Remove the 2 bolts and 2 springs, and separate the front exhaust pipe assembly from the exhaust manifold.


b.

Remove the 3 exhaust pipe supports and the front exhaust pipe assembly.


c.

Remove the gasket from the exhaust manifold.


Hide 17408 7.REMOVE TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY (w/ Side Mudguard)

a.
A171266E01
0.908,0.125 1.134,0.325 0.226,0.200 10 *1 1.086,0.208 1.547,0.4 false

Using a plastic hammer, uniformly tap out and remove the tail exhaust pipe baffle sub-assembly.

Text in Illustration
*1 Plastic Hammer