16100
1.INSTALL WATER PUMP ASSEMBLY
Install the water pump assembly through a new water pump gasket with the 3 bolts and 2 nuts.
16173
2.INSTALL WATER PUMP PULLEY
Temporarily install the water pump pulley with the 3 bolts.
Using SST, hold the water pump pulley.
Tighten the 3 bolts to the specified torque.
12305
3.INSTALL ENGINE MOUNTING INSULATOR SUB-ASSEMBLY RH
27020
4.INSTALL GENERATOR ASSEMBLY
16361A
5.INSTALL FAN AND GENERATOR V BELT
16361A
6.ADJUST FAN AND GENERATOR V BELT
16361A
7.INSPECT FAN AND GENERATOR V BELT
8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10.INSPECT FOR COOLANT LEAK
51441C
11.INSTALL ENGINE UNDER COVER RH
Install the engine under cover RH with the 3 screws and 2 bolts.