33820B
1.INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY
Connect the transmission control cable assembly to the control shaft lever with the nut.
| *1 | No. 1 Transmission Control Cable Bracket |
| *2 | Clip |
| *a | Marking |
Install the transmission control cable assembly to the No. 1 transmission control cable bracket with a new clip.
Make sure that the marking on the cable is aligned with the slit in the No. 1 transmission control cable bracket before installing the cable.
Install the transmission control cable assembly to the control cable support.
Pass the transmission control cable assembly under the transmission control cable support.
| *1 | Transmission Control Cable Assembly |
| *2 | Transmission Control Cable Support |
Do not pass the transmission control cable assembly between the transmission control cable support and dash panel.
Install the transmission control cable assembly with the 3 nuts.
58151
2.INSTALL FRONT NO. 1 FLOOR HEAT INSULATOR
Install the front No. 1 floor heat insulator with the 2 bolts and nut.
17410
3.INSTALL FRONT EXHAUST PIPE ASSEMBLY
17771A
4.INSTALL AIR CLEANER BRACKET
17700
5.INSTALL AIR CLEANER ASSEMBLY
74411
6.INSTALL BATTERY CARRIER (for LHD)
74411
7.INSTALL BATTERY CARRIER (for RHD)
74431
8.INSTALL BATTERY TRAY
28800
9.INSTALL BATTERY
33820B
10.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
11.ADJUST SHIFT LEVER POSITION
12.INSPECT SHIFT LEVER POSITION
58910C
13.INSTALL REAR CONSOLE BOX ASSEMBLY