Home › Drivetrain › U340E (AUTOMATIC TRANSMISSION / TRANSAXLE) › TRANSMISSION CONTROL CABLE › from 2014.07
RM19S0E _52 Drivetrain _051465 U340E AUTOMATIC TRANSMISSION / TRANSAXLE _0248163 TRANSMISSION CONTROL CABLE A

U340E AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  REMOVAL  


PROCEDURE

Hide 58910C 1.REMOVE REAR CONSOLE BOX ASSEMBLY

Hide 33820B 2.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

Hide 74431 4.REMOVE BATTERY TRAY

Hide 17410 8.REMOVE FRONT EXHAUST PIPE ASSEMBLY

Hide 58151 9.REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR

a.
C235679

Remove the 2 bolts, nut and front No. 1 floor heat insulator.


Hide 33820B 10.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C117118

Separate the transmission control cable assembly from the control cable support.


b.
C117100

Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.


c.

Remove the clip and separate the transmission control cable assembly from the No. 1 transmission control cable bracket.


d.
C244630

Remove the 3 nuts and transmission control cable assembly.