1.REMOVE FRONT DRIVE SHAFT ASSEMBLY
31105D
2.REMOVE FRONT TRANSAXLE CASE OIL SEAL
Using SST, remove the front transaxle case oil seal.
31105H
3.REMOVE TRANSAXLE CASE OIL SEAL
Using SST, remove the transaxle case oil seal.
31105D
4.INSTALL FRONT TRANSAXLE CASE OIL SEAL
Coat the lip of a new front transaxle case oil seal with MP grease.
Using SST and a hammer, install the front transaxle case oil seal.
1.5 to 2.5 mm (0.0591 to 0.0984 in.)
Do not damage the oil seal lip.
31105H
5.INSTALL TRANSAXLE CASE OIL SEAL
Coat the lip of a new transaxle case oil seal with MP grease.
Using SST and a hammer, install the transaxle case oil seal.
5.4 to 6.4 mm (0.213 to 0.252 in.)
Do not damage the oil seal lip.
6.INSTALL FRONT DRIVE SHAFT ASSEMBLY