1.REMOVE FRONT DRIVE SHAFT ASSEMBLY
31105H
2.REMOVE NO. 2 TRANSAXLE CASE OIL SEAL
Using SST, remove the No. 2 transaxle case oil seal.
35104F
3.REMOVE TRANSAXLE CASE OIL SEAL
Using SST, remove the transaxle case oil seal.
31105H
4.INSTALL NO. 2 TRANSAXLE CASE OIL SEAL
Coat the lip of a new No. 2 transaxle case oil seal with MP grease.
Using SST and a hammer, install the No. 2 transaxle case oil seal.
2.6 to 3.6 mm (0.103 to 0.141 in.)
Do not damage the oil seal lip.
35104F
5.INSTALL TRANSAXLE CASE OIL SEAL
Coat the lip of a new transaxle case oil seal with MP grease.
Using SST and a hammer, install the transaxle case oil seal.
2.6 to 3.6 mm (0.103 to 0.141 in.)
Do not damage the oil seal lip.
6.INSTALL FRONT DRIVE SHAFT ASSEMBLY