1.REMOVE FRONT DRIVE SHAFT ASSEMBLY
33111Q
2.REMOVE TRANSMISSION CASE OIL SEAL
Using SST, remove the transmission case oil seal.
31105H
3.REMOVE TRANSAXLE CASE OIL SEAL
Using SST, remove the transaxle case oil seal.
33111Q
4.INSTALL TRANSMISSION CASE OIL SEAL
Coat the lip of a new transmission case oil seal with MP grease.
Using SST and a hammer, tap in the transmission case oil seal.
| *a | Depth |
9.4 to 10.4 mm (0.370 to 0.409 in.)
Do not damage the oil seal lip.
31105H
5.INSTALL TRANSAXLE CASE OIL SEAL
Coat the lip of a new transaxle case oil seal with MP grease.
Using SST and a hammer, tap in the transaxle case oil seal.
| *a | Depth |
1.4 to 2.0 mm (0.0551 to 0.0787 in.)
Do not damage the oil seal lip.
6.INSTALL FRONT DRIVE SHAFT ASSEMBLY