Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR
RM19S0E _53 Suspension _051472 FRONT SUSPENSION _0248217 FRONT STABILIZER BAR A

FRONT SUSPENSION  FRONT STABILIZER BAR  INSTALLATION  


PROCEDURE

Hide 48815 1.INSTALL FRONT NO. 1 STABILIZER BAR BUSH

a.
C233390E01
2.514,0.876 2.671,1.028 0.157,0.152 10 *1 2.507,0.965 2.371,0.965 2.371,0.965 2.144,1.172 false

Install the front No. 1 stabilizer bar bush onto the front stabilizer bar.

Text in Illustration
*1 Bush Stopper
V100135

Front Side
V100136

Outer Side

HINT:
·

Install the front No. 1 stabilizer bar bush onto the front stabilizer bar so that the bush stopper of the front stabilizer bar faces the outside of the vehicle.

·

Install the front No. 1 stabilizer bar bush with its cutout facing the front of the vehicle.




Hide 48811 2.INSTALL FRONT STABILIZER BAR

a.
C233662E01
1.239,1.853 1.399,2.004 0.160,0.151 10 *a 1.328,1.844 1.328,1.615 false

Install the front stabilizer bar onto the front suspension crossmember sub-assembly with the paint mark on the left side of the vehicle.

Text in Illustration
*a Paint Mark
V100135

Left Side


Hide 48829A 3.INSTALL FRONT NO. 1 STABILIZER BRACKET LH

a.
C229644E01
2.014,0.65 2.133,0.797 0.119,0.147 10 A 1.268,1.494 1.387,1.641 0.119,0.147 10 B

Provisionally tighten bolt A.


b.

Tighten the bolts to the specified torque, in the order of B then A.

Torque:
47 N*m (479 kgf*cm, 35 ft.*lbf)


Hide 48824A 4.INSTALL FRONT NO. 1 STABILIZER BRACKET RH

HINT:

Use the same procedure for the RH side as for the LH side.


Hide 48810 6.INSTALL FRONT STABILIZER LINK ASSEMBLY LH

Hide 48820B 7.INSTALL FRONT STABILIZER LINK ASSEMBLY RH

HINT:

Use the same procedure for the RH side as for the LH side.


Hide 51201 8.INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY