42403
1.INSTALL REAR BRAKE DRUM SUB-ASSEMBLY
2.ADJUST REAR DRUM BRAKE SHOE CLEARANCE
Provisionally install the hub nuts.
Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.
| *1 | Automatic Adjust Lever |
|
Expand |
Hold the automatic adjust lever away from the adjuster, and contract the brake shoe by turning the adjust bolt using another screwdriver until the drum can rotate smoothly.
| *1 | Automatic Adjust Lever |
|
Contract |
12 notches
Install the hole plug.
3.BLEED BRAKE LINE
4.BLEED CLUTCH LINE (for Manual Transaxle)
(See page Drivetrain>CLUTCH>CLUTCH SYSTEM>BLEEDING)
5.INSTALL REAR WHEEL
6.ADJUST PARKING BRAKE LEVER TRAVEL
58910C
7.INSTALL REAR CONSOLE BOX ASSEMBLY