Home › Steering › STEERING COLUMN › STEERING WHEEL
RM19S0E _55 Steering _051481 STEERING COLUMN _0248258 STEERING WHEEL A

STEERING COLUMN  STEERING WHEEL  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (w/ VSC/Built-in Type Yaw Rate Sensor)>PRECAUTION).


PROCEDURE

Hide 45184 1.INSTALL STEERING WHEEL LOWER BOSS COVER

a.

Engage the 4 claws and install the steering wheel lower boss cover.


Hide 84632 2.INSTALL CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)

Hide 84250A 3.INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)

a.

Engage the 4 claws and 4 guides and install the steering pad switch assembly.


b.

Install the 2 screws.

Torque:
2.4 N*m (24 kgf*cm, 21 in.*lbf)


Hide 45100 5.INSTALL STEERING WHEEL ASSEMBLY

a.

Align the matchmarks and install the steering wheel assembly onto the steering column assembly.


b.

Install the nut.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


c.

Connect all the connectors to the spiral cable.


Hide 7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)