Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2011.08–2014.07
RM19S0E _58 Vehicle Interior _051493 METER / GAUGE / DISPLAY _0248310 METER / GAUGE SYSTEM C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  U0100  Lost Communication with ECM / PCM "A"  U0129  Lost Communication with Brake System Control Module  U0131  Lost Communication with Power Steering Control Module  U0151  Lost Communication with Airbag ECU  


DESCRIPTION

The combination meter communicates with the ECM, skid control ECU, power steering ECU, main body ECU and airbag sensor via the CAN communication system.

DTC No. DTC Detection Condition Trouble Area
U0100 ECM communication error
·

CAN communication system

·

ECM


U0129 Skid control ECU communication error
·

CAN communication system

·

Brake actuator assembly (Skid control ECU)


U0131 Power steering ECU communication error
·

CAN communication system

·

Power steering ECU


U0151 Center airbag sensor communication error
·

CAN communication system

·

Airbag sensor assembly



PROCEDURE

1.CONFIRM DTC OUTPUT
a.

Check DTC (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR).

Result Proceed to
CAN communication DTC is not output A
CAN communication DTC is output (except Separate Type Yaw Rate Sensor) B
CAN communication DTC is output (for Separate Type Yaw Rate Sensor) C



A

B

C