Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › STEERING PAD
RM19S0E _58 Vehicle Interior _051495 SUPPLEMENTAL RESTRAINT SYSTEMS _0248316 STEERING PAD G

SUPPLEMENTAL RESTRAINT SYSTEMS  STEERING PAD  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 45130 1.INSPECT STEERING PAD (for Vehicle not Involved in Collision)

B282583


b.

With the steering pad installed on the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the steering pad with a new one:

Any cuts, minute cracks or marked discoloration on the steering pad top surface or in the grooved portion.



Hide 45130 2.INSPECT STEERING PAD (for Vehicle Involved in Collision and Airbag has not Deployed)

CAUTION:

For steering pad removal and installation procedures, see pages Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>STEERING PAD>REMOVAL and Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>STEERING PAD>INSTALLATION, and carefully follow the correct procedure.



b.
B282734

With the steering pad removed from the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the steering pad or steering wheel with a new one:

·

Any cuts, minute cracks or marked discoloration on the steering pad top surface or in the grooved portion.

·

Any cracks or other damage to the connectors.

·

Deformation of the steering wheel assembly.

·

Deformation of the steering pad contact plate.

·

There should be no interference between the steering pad and steering wheel assembly, and the clearance should be uniform all the way around when a new steering pad is installed on the steering wheel assembly.