73350C
1.INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY
Check the angle of inclination required to lock the retractor.
Gently incline the retractor from its initial position. Check that the belt does not lock when the retractor is inclined 15° or less in any direction. Also, check that the belt locks when the inclination of the retractor is 45° or more.
| *a | Lock |
| *b | Unlock |
Do not disassemble the retractor.
If the operation is not as specified, replace the rear center seat outer belt assembly.
Engage the 2 hooks to install the rear center seat outer belt assembly.
Install the bolt.
Engage the hook and install the shoulder anchor bracket part of the rear center seat outer belt assembly with the bolt.
Install the shoulder anchor part of the rear center seat outer belt assembly with the bolt.
Check that the ELR locks.
Perform the check with the rear center seat outer belt assembly installed.
With the belt installed, check that the belt locks when it is pulled out quickly.
If the operation is not as specified, replace the rear center seat outer belt assembly.
Remove the bolt and the shoulder anchor part of the rear center seat outer belt assembly.
73373
2.INSTALL REAR SEAT SHOULDER BELT COVER
63310
3.INSTALL ROOF HEADLINING ASSEMBLY (for 3 Door)
63310
4.INSTALL ROOF HEADLINING ASSEMBLY (for 5 Door)