Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING(for 3 Door) › 2011.08–2014.07
RM19S0E _58 Vehicle Interior _051500 INTERIOR PANELS / TRIM _0248373 ROOF HEADLINING(for 3 Door) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for 3 Door)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL ROOF HEADLINING ASSEMBLY

a.
B284340

Pull the roof headlining back into the vehicle through the back door.

NOTICE:

Do not damage the roof headlining assembly or body interior.



b.

Engage the 2 hooks and install the roof headlining.


c.

Install the 3 clips.


d.

Engage the 2 claws.


e.

for front pillar RH side:

i.

Install the 4 clamps.


ii.

Connect the connector.



f.

for front pillar LH side:

i.

Install the 4 clamps.


ii.

Connect the connector.



g.

for rear pillar RH side:

i.

Install the 3 clamps.


ii.

Connect the connector.



Hide 73350C 2.INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY

Hide 63339A 5.INSTALL ROOF HEADLINING SERVICE HOLE COVER (w/ Cover)

Hide 74320 8.INSTALL VISOR ASSEMBLY LH

HINT:

Use the same procedure as for the RH side.


Hide 62451C 9.INSTALL REAR ROOF SIDE RAIL GARNISH RH

a.

Engage the 4 clips and install the roof side rail garnish.


Hide 62452C 10.INSTALL REAR ROOF SIDE RAIL GARNISH LH

HINT:

Use the same procedure as for the RH side.


Hide 62471A 11.INSTALL ROOF SIDE INNER GARNISH RH

a.

Pass the rear seat 3 point type outer belt through the slit in the roof side inner garnish.


b.

Engage the 5 clips and install the roof side inner garnish.


Hide 62472A 12.INSTALL ROOF SIDE INNER GARNISH LH

HINT:

Use the same procedure as for the RH side.


Hide 64730B 13.INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

a.

Engage the 3 clips and the 3 claws and install the deck trim side panel.


b.

Install the 3 screws.


Hide 64740C 14.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

HINT:

Use the same procedure as for the RH side.


Hide 73360 15.INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

a.

Engage the 2 claws and install the rear seat 3 point type outer belt.


b.

Tighten the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 73370 16.INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

HINT:

Use the same procedure as for the RH side.


Hide 09113 18.INSTALL JACK HANDLE

Hide 81250 19.INSTALL NO. 2 ROOM LIGHT ASSEMBLY (w/ Luggage Compartment Room Light)

Hide 62211 20.INSTALL FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag)

Hide 62212 21.INSTALL FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag)

HINT:

Use the same procedure as for the RH side.


Hide 62211 22.INSTALL FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag)

Hide 62212 23.INSTALL FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag)

HINT:

Use the same procedure as for the RH side.


Hide 62411B 24.INSTALL CENTER PILLAR UPPER GARNISH RH

a.

Pass the front seat outer belt through the slit in the center pillar upper garnish.


b.

Engage the clip and install the center pillar upper garnish with 2 screws.


Hide 62412B 25.INSTALL CENTER PILLAR UPPER GARNISH LH

HINT:

Use the same procedure as for the RH side.


Hide 62510P 26.INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

a.

Engage the 8 clips and the 10 claws.


b.

Engage the 3 guides and install the quarter trim panel.


Hide 62520P 27.INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

HINT:

Use the same procedure as for the RH side.


Hide 73201C 28.INSTALL FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY RH

Hide 73202B 29.INSTALL FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY LH

HINT:

Use the same procedure as for the RH side.


Hide 62311B 30.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

a.
B284341E03
1.458,0.75 1.073,0.958 false 2.458,1.063 2.438,1.375 false 1.49,0.604 1.656,0.76 0.167,0.156 10 false *a 2.375,1.396 2.542,1.552 0.167,0.156 10 false *b

Align the paint mark on the front door opening trim weatherstrip with the flange position on the vehicle body and install the weatherstrip.

Text in Illustration
*a Paint Mark
*b Flange Position

Paint Mark:
Area Color
RH Side Yellow
LH Side White


NOTICE:

After installation, check that the corners fit correctly.



Hide 62312B 31.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

HINT:

Use the same procedure as for the RH side.


Hide 62112 33.INSTALL COWL SIDE TRIM BOARD LH

HINT:

Use the same procedure as for the RH side.


Hide 67913 34.INSTALL FRONT DOOR SCUFF PLATE RH

a.

Engage the 8 claws and install the front door scuff plate.


Hide 67914 35.INSTALL FRONT DOOR SCUFF PLATE LH

HINT:

Use the same procedure as for the RH side.


Hide 36.INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

Hide 37.INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

Hide 38.INSTALL REAR SEAT ASSEMBLY (for Fold Down Seat Type)