84840G
1.INSTALL BACK DOOR OPENER SWITCH ASSEMBLY
Install the back door opener switch.
Make sure the arrows on the back door opener switch and the back door garnish are pointing in the same direction.
76801
2.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
76827A
3.INSTALL BACK DOOR GARNISH NO. 2 RETAINER (w/ Cover)
4.INSTALL BACK DOOR LOCK CYLINDER ASSEMBLY (w/ Lock Cylinder)
85110R
5.INSTALL REAR WIPER MOTOR ASSEMBLY
67751
6.INSTALL BACK DOOR TRIM BOARD