Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM (w/ VSC/Built-in Type Yaw Rate Sensor) › from 2017.01
RM19S0E _58 Vehicle Interior _051495 SUPPLEMENTAL RESTRAINT SYSTEMS _0248314 AIRBAG SYSTEM(w/ VSC/Built-in Type Yaw Rate Sensor) C

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM(w/ VSC/Built-in Type Yaw Rate Sensor)  B1620/21  Side Airbag Sensor RH Circuit Malfunction  B1622/81  Lost communication with Side Airbag Sensor RH  


DESCRIPTION

The side collision sensor RH circuit (to determine deployment of the front seat side airbag assembly RH and curtain shield airbag assembly RH) is composed of the airbag sensor assembly, side airbag sensor assembly RH and No. 2 side airbag sensor assembly RH.

The side airbag sensor assembly RH detects impacts to the vehicle and sends signals to the airbag sensor assembly to determine if the airbag should be deployed. DTC B1620/21 or B1622/81 is stored when a malfunction is detected in the side collision sensor RH circuit.

DTC No. DTC Detection Condition Trouble Area
B1620/21
B1622/81
·

Side airbag sensor assembly RH malfunction

·

Airbag sensor assembly malfunction


·

Side airbag sensor assembly RH

·

Airbag sensor assembly



WIRING DIAGRAM

C241675E20
1.177,1 1.583,1.146 0.406,0.146 10 false BBR+ 1.177,1.802 1.583,1.948 0.406,0.146 10 false BBR- 5.698,1 6.104,1.146 0.406,0.146 10 false BBR+ 5.698,1.802 6.104,1.948 0.406,0.146 10 false BBR- 1.177,3.188 1.594,3.333 0.417,0.146 10 false BCR+ 1.177,3.969 1.594,4.115 0.417,0.146 10 false BCR- 3.896,3.188 4.313,3.333 0.417,0.146 10 false BCR+ 3.896,3.969 4.281,4.104 0.385,0.135 10 false BCR- 1.698,0.906 1.802,1.052 0.104,0.146 10 false 4 1.698,1.719 1.802,1.865 0.104,0.146 10 false 3 1.698,3.125 1.802,3.26 0.104,0.135 10 false 1 1.698,3.875 1.802,4.042 0.104,0.167 10 false 2 3.646,3.115 3.74,3.271 0.094,0.156 10 false 2 3.656,3.885 3.76,4.042 0.104,0.156 10 false 1 5.375,1.719 5.563,1.865 0.188,0.146 10 false 11 5.458,0.906 5.563,1.052 0.104,0.146 10 false 8 0.625,4.677 0.896,4.823 0.271,0.146 10 false K22 3.802,4.688 4.073,4.854 0.271,0.167 10 false K24 5.573,4.677 5.927,4.854 0.354,0.177 10 false K50 0.625,4.833 2.792,4.969 2.167,0.135 10 false Side Airbag Sensor Assembly RH 3.802,4.854 5.188,5.177 1.385,0.323 10 false No. 2 Side Airbag Sensor Assembly RH 5.573,4.823 7.115,5 1.542,0.177 10 false Airbag Sensor Assembly

PROCEDURE

1.CHECK SIDE AIRBAG SENSOR ASSEMBLY RH
C235513E01
0.651,1.683 0.821,1.843 0.170,0.161 10 *1 1.745,1.468 1.914,1.628 0.170,0.161 10 *2

a.

Turn the ignition switch off.


b.

Disconnect the cable from the negative (-) battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



c.

Interchange the side airbag sensor assembly RH with the side airbag sensor assembly LH and connect the connectors to them.


d.

Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.


e.

Turn the ignition switch to ON, and wait for at least 60 seconds.



g.

Turn the ignition switch off.


h.

Turn the ignition switch to ON, and wait for at least 60 seconds.


i.

Check for DTCs (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (w/ VSC/Built-in Type Yaw Rate Sensor)>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC B1620/21, B1622/81, B1625/22 and B1627/82 are not output. A
DTC B1625/22 or B1627/82 is output. B
DTC B1620/21 or B1622/81 is output. C

Text in Illustration
*1 Side Airbag Sensor Assembly LH
*2 Airbag Sensor Assembly

HINT:

DTCs other than B1620/21, B1622/81, B1625/22 and B1627/82 may be output at this time, but they are not related to this check.



j.

Turn the ignition switch off.


k.

Disconnect the cable from the negative (-) battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



l.

Return the side airbag sensor assembly RH and the side airbag sensor assembly LH to their original positions and connect the connectors to them.



A

B

C