55411G
1.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL
55475B
2.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH
83950M
3.REMOVE TELLTALE LIGHT ASSEMBLY
4.REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)
5.REMOVE RADIO AND NAVIGATION ASSEMBLY (w/ Navigation System)
6.REMOVE AIR CONDITIONING PANEL ASSEMBLY
Disengage the 8 clips.
Disconnect the 4 connectors to separate the air conditioning panel assembly.
Disengage the 2 claws to disconnect the defroster damper control cable sub-assembly.
Disengage the 2 claws to disconnect the air inlet damper control cable sub-assembly.
Disengage the 2 claws to disconnect the air mix damper control cable sub-assembly.