1.INSPECT BRAKE LINE PIPES AND HOSES
Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.
Using a mirror, check the entire circumference and length of the brake lines and hoses for:
Damage
Wear
Deformation
Cracks
Kinks
Corrosion
Leaks
Twists
Check all the clamps for tightness and check the connections for leakage.
Check that the hoses and lines are not near sharp edges, moving parts or the exhaust system.
Check that the lines are installed properly and pass through the center of the grommets.
2.INSPECT FRONT BRAKE
Check the front brake pads and discs.
3.INSPECT REAR BRAKE
Check the rear brake pads and discs.
Click hereBrake>BRAKE (REAR)>REAR BRAKE(for Disc Type)>INSPECTION
4.INSPECT BRAKE LININGS AND DRUMS
Check the brake linings and drums. Also check the brake linings of parking brake.
Click hereBrake>BRAKE (REAR)>REAR BRAKE(for Drum Type)>INSPECTION
5.INSPECT OR CHANGE BRAKE FLUID
Inspect or change the brake fluid.
for LHD: Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID(for LHD)>ON-VEHICLE INSPECTION
for RHD: Click hereBrake>BRAKE SYSTEM (OTHER)>BRAKE FLUID(for RHD)>ON-VEHICLE INSPECTION