Home › Vehicle Exterior › DOOR / HATCH › HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD) › 2013.08–2014.03
RM30M0E _59 Vehicle Exterior _017122 DOOR / HATCH _0087455 HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD) A

DOOR / HATCH  HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD)  REMOVAL  


PROCEDURE

Hide 55606 1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 55432B 2.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL

Hide 53601 3.REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.
B341592

Disengage the claw and the 3 guides.


b.
B277166

Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.


Hide 4.REMOVE FRONT WHEEL RH

Hide 53875A 5.REMOVE FRONT FENDER LINER RH

HINT:

Use the same procedure as for the LH side.

Click hereDrivetrain>AXLE AND DIFFERENTIAL>FRONT AXLE HUB>REMOVAL


Hide 53510 7.REMOVE HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch)

Hide 53510 8.REMOVE HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch)

a.
B341593

Remove the 3 bolts.


b.
B352748

Disengage the guide and disconnect the hood lock control cable assembly, and remove the hood lock assembly.


Hide 53630 9.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY

a.

Disengage the hood lock control cable assembly from the 3 clamps as shown in the illustration.

B341594C02
1.125,0.885 0.823,0.469 true 0.802,1.198 0.688,1.271 true 1.063,2.49 0.688,2.719 true 1.104,2.594 1.302,2.74 true 5.823,0.583 5.563,0.667 true 6.198,0.823 6.458,0.542 true 2.177,5.25 2.552,5.396 true 2.281,5.177 2.563,4.927 true 0.646,0.385 0.958,0.542 0.313,0.156 10 false *1 0.521,1.198 0.833,1.354 0.313,0.156 10 false *2 5.385,0.604 5.698,0.76 0.313,0.156 10 false *3 0.521,2.656 0.833,2.823 0.313,0.167 10 false *1 1.333,2.677 1.646,2.833 0.313,0.156 10 false *2 2.573,5.292 2.885,5.448 0.313,0.156 10 false *1 2.573,4.823 2.885,4.979 0.313,0.156 10 false *2 6.469,0.438 6.781,0.594 0.313,0.156 10 false *1
*1 Hood Lock Control Cable Assembly *2 Clamp
*3 Grommet - -



b.

Disengage the grommet and remove the hood lock control cable assembly.