1.INSTALL WIRE HARNESS CLAMP BRACKET
Install the 2 wire harness clamp brackets to the cylinder head sub-assembly with the 2 bolts.
44763
2.INSTALL BOOSTER VACUUM TUBE
Install the booster vacuum tube to the cylinder head sub-assembly with the 2 bolts.
89422
3.INSTALL ENGINE COOLANT TEMPERATURE SENSOR
83530
4.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY
16268
5.INSTALL NO. 1 WATER BY-PASS PIPE
Install a new water by-pass pipe gasket to the cylinder block sub-assembly.
Install the No. 1 water by-pass pipe to the cylinder head sub-assembly and cylinder block sub-assembly with the 2 bolts and 2 nuts.
89615
6.INSTALL KNOCK SENSOR
27060
7.INSTALL GENERATOR WITH REGULATOR ASSEMBLY
16381
8.INSTALL FAN BELT ADJUSTING BAR