Home › Drivetrain › CLUTCH › CLUTCH MASTER CYLINDER(for RHD) › 2013.08–2017.10
RM30M0E _52 Drivetrain _017089 CLUTCH _0091164 CLUTCH MASTER CYLINDER(for RHD) A

CLUTCH  CLUTCH MASTER CYLINDER(for RHD)  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Wash off clutch fluid immediately if it comes in contact with any painted surface.


PROCEDURE

Hide 55606 1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 55432B 2.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL

Hide 31434C 4.DISCONNECT CLUTCH RESERVOIR TUBE

a.
C283231

Loosen the hose clip and disconnect the clutch reservoir tube from the clutch master cylinder assembly.

HINT:

Use a container to collect the fluid.



Hide 31481 5.DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE

a.
C235142

Using a 10 mm union nut wrench, disconnect the clutch master cylinder to flexible hose tube from the clutch master cylinder assembly.

HINT:

Use a container to collect the fluid.



Hide 31453 6.DISCONNECT CLUTCH MASTER CYLINDER PUSH ROD CLEVIS

Hide 31410 7.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

a.
C235127

Remove the 2 nuts and clutch master cylinder assembly from the body.


Hide 31453 8.REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS

a.
C125988C02
2.177,0.885 2.594,0.469 false 1.635,1.104 1.115,0.5 false 0.969,0.396 1.281,0.552 0.313,0.156 10 false *1 2.625,0.365 2.938,0.521 0.313,0.156 10 false *2 1.135,1.844 1.292,2.042 0.156,0.198 10 false A
*1 Lock Nut
*2 Clutch Master Cylinder Push Rod Clevis


Measure the dimension A as shown in the illustration before loosening the lock nut.


b.

Loosen the lock nut and remove the clutch master cylinder push rod clevis from the clutch master cylinder assembly.

NOTICE:

When loosening the lock nut, be sure to hold the clutch master cylinder push rod clevis in place by its square portion.



c.

Remove the lock nut from the clutch master cylinder assembly.