Home › Engine / Hybrid System › 2NZ-FE COOLING › RADIATOR › 2013.08–2014.03
RM30M0E _51 Engine / Hybrid System _017082 2NZ-FE COOLING _0092345 RADIATOR A

2NZ-FE COOLING  RADIATOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Be sure that the ignition switch is off if you work near the electric cooling fans or radiator grille. With the ignition switch ON, the electric cooling fans may automatically start to run if the engine coolant temperature is high and/or the air conditioning is on.


PROCEDURE

Hide 81150 1.REMOVE HEADLIGHT ASSEMBLY LH

Hide 81150 2.REMOVE HEADLIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 89173 3.REMOVE FRONT AIRBAG SENSOR (w/ Airbag System)

Hide 53510 5.REMOVE HOOD LOCK ASSEMBLY (for LHD)

Hide 53510 6.REMOVE HOOD LOCK ASSEMBLY (for RHD)

Hide 53215B 7.REMOVE HOOD LOCK SUPPORT

A300055

a.

Disengage the clamp to disconnect the wire harness from the hood lock support.


b.

Remove the 2 bolts and hood lock support from the radiator support assembly.


Hide 88891H 8.REMOVE NO. 1 COOLER COVER (w/o Fan Shroud Ventilation Duct)

Hide 53216A 9.REMOVE UPPER RADIATOR SUPPORT (for LHD)

a.
A304789

Disengage the clamp to separate the hood lock control cable assembly from the upper radiator support.


b.
A304785

Disengage the 2 clamps to disconnect the wire harness from the upper radiator support.


c.
A300057

Disconnect the low pitched horn assembly connector.


d.
A302891

Remove the 4 bolts and upper radiator support from the radiator support assembly.


Hide 53216A 10.REMOVE UPPER RADIATOR SUPPORT (for RHD)

a.
A305634

Disengage the clamp to separate the hood lock control cable assembly from the upper radiator support.


b.

Disengage the 2 clamps to disconnect the wire harness from the upper radiator support.


c.
A300057

Disconnect the low pitched horn assembly connector.


d.
A302891

Remove the 4 bolts and upper radiator support from the radiator support assembly.


Hide 16750 11.REMOVE FAN SHROUD VENTILATION DUCT ASSEMBLY (w/ Fan Shroud Ventilation Duct)

a.
A307871

Disengage the 2 claws and 2 guides to remove the fan shroud ventilation duct assembly from the radiator assembly.


Hide 12.DISCONNECT RADIATOR RESERVOIR TANK HOSE

A302892

a.

Disconnect the radiator reservoir tank hose from the water filler sub-assembly.


Hide 16573B 13.DISCONNECT NO. 3 RADIATOR HOSE

A302925

a.

Loosen the hose clip and disconnect the No. 3 radiator hose from the radiator assembly.


Hide 16572D 14.DISCONNECT NO. 2 RADIATOR HOSE

A300058

a.

Loosen the hose clip and disconnect the No. 2 radiator hose from the radiator assembly.


Hide 32942 15.DISCONNECT OUTLET NO. 1 OIL COOLER HOSE (for Automatic Transaxle)

A302915

a.

Loosen the hose clip and disconnect the outlet No. 1 oil cooler hose from the radiator assembly.


Hide 32941 16.DISCONNECT INLET NO. 1 OIL COOLER HOSE (for Automatic Transaxle)

A302916

a.

Loosen the hose clip and disconnect the inlet No. 1 oil cooler hose from the radiator assembly.


Hide 16400 17.REMOVE RADIATOR ASSEMBLY (w/ Cooler System)

A302947

a.

Disconnect the cooling fan motor connector.


b.

Disengage the 3 clamps to disconnect the wire harness from the fan shroud.


c.
A302893

Disengage the 2 claws and 2 guides to separate the cooler condenser assembly from the radiator assembly.

HINT:

While tilting the cooler condenser assembly toward the front of the vehicle, separate the cooler condenser assembly from the radiator assembly.



d.

Remove the radiator assembly together with fan shroud from the vehicle.

NOTICE:

Do not apply excessive force to the cooler condenser assembly or piping when removing the radiator assembly.



Hide 16400 18.REMOVE RADIATOR ASSEMBLY (w/o Cooler System)

A302947

a.

Disconnect the cooling fan motor connector.


b.

Disengage the 3 clamps to disconnect the wire harness from the fan shroud.


c.

Remove the radiator assembly together with fan shroud from the vehicle.


Hide 16711 19.REMOVE FAN SHROUD

a.
A302894

Disengage the 2 claws and 2 guides to remove the fan shroud from the radiator assembly.


Hide 16523A 20.REMOVE RADIATOR SUPPORT CUSHION

A104900

a.

Remove the 2 radiator support cushions from the radiator assembly.


Hide 16535 21.REMOVE LOWER RADIATOR SUPPORT

A104901

a.

Remove the 2 lower radiator supports from the radiator assembly.


Hide 22.REMOVE RADIATOR DRAIN COCK PLUG

A106592

a.

Remove the radiator drain cock plug from the radiator assembly.

NOTICE:

Replace the O-ring if it is damaged.