1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
81150
2.REMOVE HEADLIGHT ASSEMBLY LH (for Sedan)
81150
3.REMOVE HEADLIGHT ASSEMBLY RH (for Sedan)
Use the same procedure as for the LH side.
89173
4.REMOVE FRONT AIRBAG SENSOR
53141F
5.REMOVE RADIATOR COVER (for Hatchback)
53101
6.REMOVE RADIATOR GRILLE SUB-ASSEMBLY (for Hatchback)
53510
7.REMOVE HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch)
53510
8.REMOVE HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch)
53215B
9.REMOVE HOOD LOCK SUPPORT (for Sedan)
53215B
10.REMOVE HOOD LOCK SUPPORT (for Hatchback)
88891H
11.REMOVE NO. 1 COOLER COVER (w/ No. 1 Cooler Cover)
for Sedan
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Sedan)>DISASSEMBLY
for Hatchback
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(for Hatchback)>DISASSEMBLY
53216A
12.REMOVE UPPER RADIATOR SUPPORT
for LHD
Click hereEngine / Hybrid System>2NZ-FE COOLING>RADIATOR>REMOVAL
for RHD
Click hereEngine / Hybrid System>2NZ-FE COOLING>RADIATOR>REMOVAL
88711
13.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88706A
14.DISCONNECT LIQUID TUBE SUB-ASSEMBLY A
Remove the bolt and disconnect the liquid tube sub-assembly A from the cooler condenser assembly.
Remove the O-ring from the liquid tube sub-assembly A.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88460
15.REMOVE COOLER CONDENSER ASSEMBLY
Disengage the 2 claws.
Do not damage the cooler condenser assembly or radiator assembly when removing the cooler condenser assembly.
Disengage the 2 guides and remove the cooler condenser assembly as shown in the illustration.