55412D
1.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL (w/ Radio Receiver)
55412D
2.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL (w/o Radio Receiver)
3.REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)
4.REMOVE RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)
55606
5.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55432B
6.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for LHD)
55432B
7.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)
55411G
8.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL
9.REMOVE UPPER CENTER INSTRUMENT CLUSTER FINISH PANEL
55474C
10.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55650
11.REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (for LHD)
55650
12.REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (for RHD)
55410C
13.REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
55550
14.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
55900
15.REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
55902C
16.REMOVE AIR CONDITIONING PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)
55604B
17.REMOVE INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY
55475A
18.REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
58910C
19.REMOVE REAR CONSOLE BOX ASSEMBLY (w/ Console Box Lid)
58910C
20.REMOVE REAR CONSOLE BOX ASSEMBLY (w/o Console Box Lid)
55434B
21.REMOVE NO. 2 LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for LHD)
55434B
22.REMOVE NO. 2 LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for RHD)
55306A
23.REMOVE NO.1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY
Disengage the front floor cappet assembly, as shown in the illustration.
Remove the clip and peel back the front floor carpet assembly.
Disengage the 3 clamps.
Remove the bolt, nut and 2 screws.
Remove the No. 1 instrument panel brace sub-assembly.
87103B
24.REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY
Disconnect the connector.
Remove the 3 screws and blower motor with fan sub-assembly.
Do not apply excessive force to the instrument panel wire.