Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER(for LHD) › 2016.04–2016.10
RM30M0E _54 Brake _017099 BRAKE SYSTEM (OTHER) _0092758 BRAKE BOOSTER(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER(for LHD)  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Make sure to release the vacuum from the brake booster assembly before removing the brake master cylinder sub-assembly from the brake booster assembly.


PROCEDURE

Hide 47201 1.REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

Hide 55606 2.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 55432B 3.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL

Hide 45259A 4.REMOVE COLUMN HOLE COVER SILENCER SHEET

Hide 45209 5.SEPARATE STEERING SLIDING YOKE SUB-ASSEMBLY

Hide 44510 6.REMOVE BRAKE ACTUATOR ASSEMBLY (w/ ABS,VSC)

a.

except CVT:

i.
C285142C02
1.833,1.396 2.26,1.188 false 1.667,1.302 1.979,1.458 0.313,0.156 10 false *a
*a Lock Lever


Release the lock lever and disconnect the brake actuator connector.

NOTICE:

Be careful not to allow brake fluid to enter the removed connector.



ii.
C286076

Remove the 3 bolts and brake actuator assembly with the brake actuator bracket assembly.

NOTICE:
·

Do not damage the brake tubes or wire harness.

·

Do not carry the brake actuator assembly with the brake actuator bracket assembly by the connector.





b.

for CVT:

i.
C349608C02
2.021,0.24 2.406,0.292 false 1.844,0.135 2.156,0.292 0.313,0.156 10 false *a
*a Lock Lever


Release the lock lever and disconnect the brake actuator connector.

NOTICE:

Be careful not to allow brake fluid to enter the removed connector.



ii.
C349615

Remove the 3 bolts and brake actuator assembly with the brake actuator bracket assembly.

NOTICE:
·

Do not damage the brake tubes or wire harness.

·

Do not carry the brake actuator assembly with the brake actuator bracket assembly by the connector.





Hide 47315 7.REMOVE FRONT NO. 5 BRAKE TUBE (w/ ABS,VSC)

a.
C293377

Using a 10 mm union nut wrench, disconnect the front No. 5 brake tube from the front flexible hose while holding the front flexible hose with a wrench.

NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt or dust to enter the brake tube from the connecting parts.




b.

Remove the grommet to remove the front No. 5 brake tube from the body.


Hide 47150 8.REMOVE PROPORTIONING VALVE ASSEMBLY (w/o ABS,VSC)

a.
C286851

Remove the 2 bolts and proportioning valve bracket with the proportioning valve assembly from the body.


Hide 44772 9.DISCONNECT CHECK VALVE TO CONNECTOR TUBE HOSE (for Automatic Transaxle and CVT)

C286810

a.

Loosen the 2 hose clips and disconnect the 2 check valve to connector tube hoses from the 2 brake vacuum check valve assemblies.


Hide 44772 10.DISCONNECT CHECK VALVE TO CONNECTOR TUBE HOSE (for Manual Transaxle)

C168419

a.

Loosen the hose clip and disconnect the check valve to connector tube hose from the brake vacuum check valve assembly.


Hide 84340 11.REMOVE STOP LIGHT SWITCH ASSEMBLY

Hide 12.SEPARATE WIRE HARNESS

Hide 47101A 13.REMOVE BRAKE PEDAL RETURN SPRING

Hide 47264D 14.REMOVE BRAKE MASTER CYLINDER PUSH ROD CLEVIS

a.
C293151C01
0.896,1.271 0.958,0.979 0.958,0.979 1.125,0.979 true 0.583,1.073 0.708,0.729 0.708,0.729 0.875,0.729 true 1.063,1.74 0.896,1.74 0.896,1.74 0.75,1.375 true 1.115,1.656 1.427,1.854 0.313,0.198 10 false *3 0.917,0.667 1.229,0.865 0.313,0.198 10 false *2 1.177,0.896 1.396,1.094 0.219,0.198 10 true *1
*1 Push Rod Pin
*2 Clevis Lock Nut
*3 Brake Master Cylinder Push Rod Clevis


Loosen the clevis lock nut of the brake master cylinder push rod clevis.


b.

Remove the clip and push rod pin to separate the brake master cylinder push rod clevis from the brake pedal sub-assembly.


c.

Remove the brake master cylinder push rod clevis and clevis lock nut from the brake booster assembly.


Hide 44610 15.REMOVE BRAKE BOOSTER ASSEMBLY

a.

for 1NR-FE, 2NR-FE:

i.
C356912

Disconnect the vacuum sensor assembly connector.



b.
C286087

Remove the 4 nuts and brake booster assembly from the body.


c.

Remove the brake booster gasket from the brake booster assembly.