Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER › 2016.10–2017.10
RM30M0E _58 Vehicle Interior _017118 HEATING / AIR CONDITIONING _0090065 CONDENSER A

HEATING / AIR CONDITIONING  CONDENSER  REMOVAL  


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 81150 2.REMOVE HEADLIGHT ASSEMBLY LH (for Sedan)

Hide 81150 3.REMOVE HEADLIGHT ASSEMBLY RH (for Sedan)

HINT:

Use the same procedure as for the LH side.


Hide 53141F 5.REMOVE RADIATOR COVER (for Hatchback)

Hide 53101 6.REMOVE RADIATOR GRILLE SUB-ASSEMBLY (for Hatchback)

Hide 53510 7.REMOVE HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch)

Hide 53510 8.REMOVE HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch)

Hide 53215B 9.REMOVE HOOD LOCK SUPPORT (for Sedan)

Hide 53215B 10.REMOVE HOOD LOCK SUPPORT (for Hatchback)

Hide 88891H 11.REMOVE NO. 1 COOLER COVER (w/ No. 1 Cooler Cover)

Hide 53216A 12.REMOVE UPPER RADIATOR SUPPORT

Hide 88711 13.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

a.
I109763

Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.


b.

Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.



Hide 88706A 14.DISCONNECT LIQUID TUBE SUB-ASSEMBLY A

a.
I109696

Remove the bolt and disconnect the liquid tube sub-assembly A from the cooler condenser assembly.


b.

Remove the O-ring from the liquid tube sub-assembly A.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.



Hide 88460 15.REMOVE COOLER CONDENSER ASSEMBLY

a.
I110092

Disengage the 2 claws.

NOTICE:

Do not damage the cooler condenser assembly or radiator assembly when removing the cooler condenser assembly.



b.
I109762

Disengage the 2 guides and remove the cooler condenser assembly as shown in the illustration.