86101S
1.INSTALL NO. 3 ANTENNA CORD SUB-ASSEMBLY (for Sedan)
Engage the 3 clamps and the hook to install the No. 3 antenna cord sub-assembly.
Connect the connector.
86101S
2.INSTALL NO. 3 ANTENNA CORD SUB-ASSEMBLY (for Hatchback)
Engage the 4 clamps to install the No. 3 antenna cord sub-assembly.
Connect the connector.
86101J
3.INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Sedan)
Align the positioning tape of the No. 2 antenna cord sub-assembly with the protrusion of the roof headlining assembly and wrap new adhesive tape around them as shown in the illustration.
|
Adhesive Tape |
|
Positioning Tape |
|
Front | - | - |
Align the No. 2 antenna cord sub-assembly positioning tape with the marking of the roof headlining assembly.
Install the No. 2 antenna cord sub-assembly onto the roof headlining assembly with 6 new adhesive tapes.
Align the positioning tape of the No. 2 antenna cord sub-assembly with the protrusion of the roof headlining assembly and wrap new adhesive tape around them as shown in the illustration.
| *a | Marking | - | - |
|
Adhesive Tape |
|
Positioning Tape |
|
Front | - | - |
Install the No. 2 antenna cord sub-assembly onto the roof headlining assembly with a new adhesive tape.
Install the rest of the No. 2 antenna cord sub-assembly onto the roof headlining assembly with a new adhesive tape.
| *a | Marking | - | - |
|
Adhesive Tape |
|
Front |
86101J
4.INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for Hatchback)
Align the positioning tape of the No. 2 antenna cord sub-assembly with the protrusion of the roof headlining assembly and wrap new adhesive tape around them as shown in the illustration.
|
Adhesive Tape |
|
Positioning Tape |
|
Front | - | - |
Align the No. 2 antenna cord sub-assembly positioning tape with the marking of the roof headlining assembly.
Install the No. 2 antenna cord sub-assembly onto the roof headlining assembly with 6 new adhesive tapes.
Align the positioning tape of the No. 2 antenna cord sub-assembly with the protrusion of the roof headlining assembly and wrap new adhesive tape around them as shown in the illustration.
| *a | Marking | - | - |
|
Adhesive Tape |
|
Front |
Install the rest of the No. 2 antenna cord sub-assembly onto the roof headlining assembly with a new adhesive tape.
| *a | Marking | - | - |
|
Adhesive Tape |
|
Front |
63310
5.INSTALL ROOF HEADLINING ASSEMBLY (for Sedan)
63310
6.INSTALL ROOF HEADLINING ASSEMBLY (for Hatchback)
86101S
7.INSTALL ANTENNA CORD SUB-ASSEMBLY
Engage the 6 clamps and install the antenna cord sub-assembly.
8.INSTALL UPPER INSTRUMENT PANEL