Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO ANTENNA CORD(for TMMIN Made) › 2017.10–2018.01
RM30M0E _56 Audio / Visual / Telematics _017106 AUDIO / VIDEO _0335105 RADIO ANTENNA CORD(for TMMIN Made) A

AUDIO / VIDEO  RADIO ANTENNA CORD(for TMMIN Made)  INSTALLATION  


PROCEDURE

Hide 86101J 1.INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY

a.

Align the positioning tape of the No. 2 antenna cord sub-assembly with the protrusion of the roof headlining assembly and wrap new adhesive tape around them as shown in the part of the illustration labeled A.

E291302C03
5.896,1.521 6.063,1.573 false 6.115,1.51 6.427,1.708 0.313,0.198 10 false *a 0.906,0.177 1.146,0.375 0.24,0.198 10 false A
*a Marking - -
V100155

Adhesive Tape
V100143

Positioning Tape
V100135

Front - -



b.

Align the No. 2 antenna cord sub-assembly positioning tape with the marking of the roof headlining assembly.


c.

Install the No. 2 antenna cord sub-assembly onto the roof headlining assembly with new adhesive tape.


d.

Align the No. 2 antenna cord sub-assembly with the markings of the roof headlining assembly.

E291303C02
3.521,3.333 3.792,3.406 false 3.833,3.344 4.146,3.542 0.313,0.198 10 false *a
*a Marking - -
V100155

Adhesive Tape
V100135

Front



e.

Install the No. 2 antenna cord sub-assembly onto the roof headlining assembly with 5 new adhesive tapes.


f.

Install the rest of the No. 2 antenna cord sub-assembly onto the roof headlining assembly with a new adhesive tape.

E271656C02
6.323,0.5 6.49,0.438 false 5.26,3.427 5.083,3.323 false 6.177,0.458 6.49,0.615 0.313,0.156 10 false *a 5.292,3.375 5.604,3.531 0.313,0.156 10 false *b
*a Cutout *b Marking
V100155

Adhesive Tape
V100135

Front



g.

Insert the No. 2 antenna cord sub-assembly into the cutout of the roof headlining assembly.


Hide 86101 3.INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD)

a.

Engage the 4 clamps and 3 guides to install the antenna cord sub-assembly.


Hide 86101 4.INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD)

a.

Engage the 3 clamps and 3 guides to install the antenna cord sub-assembly.


Hide 55085 5.INSTALL NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY (for LHD)

Hide 55084E 6.INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY (for RHD)

Hide 55950G 7.INSTALL DEFROSTER NOZZLE ASSEMBLY

a.

Engage the 3 guides to install the defroster nozzle assembly.


b.

Install the 3 screws.


c.

for Automatic Air Conditioning System:

i.

Connect the connector.



Hide 55301 8.INSTALL INSTRUMENT PANEL SUB-ASSEMBLY