Home › Vehicle Exterior › DOOR / HATCH › HOOD LOCK CONTROL CABLE ASSEMBLY(for TMT Made LHD) › 2017.10–2018.01
RM30M0E _59 Vehicle Exterior _017122 DOOR / HATCH _0335782 HOOD LOCK CONTROL CABLE ASSEMBLY(for TMT Made LHD) A

DOOR / HATCH  HOOD LOCK CONTROL CABLE ASSEMBLY(for TMT Made LHD)  INSTALLATION  


PROCEDURE

Hide 53630 1.INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

a.

Engage the grommet.

B488383C01
5.667,1.625 5.833,1.458 false 6.333,1.646 6.5,1.479 false 5.427,4.938 5.594,4.771 true 5.01,5.333 5.177,5.25 false 3.021,5.083 3.188,4.917 true 3.333,5 3.5,5.167 false 1.313,5.042 1.479,4.875 true 1.396,5.167 1.563,5.333 false 6.594,1.375 6.906,1.531 0.313,0.156 10 false *1 4.802,5.229 5.115,5.385 0.313,0.156 10 false *a 5.49,1.521 5.802,1.677 0.313,0.156 10 false *b 5.667,4.667 5.979,4.823 0.313,0.156 10 false *1 2.833,4.979 3.146,5.135 0.313,0.156 10 false *1 3.573,5.063 3.885,5.219 0.313,0.156 10 false *a 1.552,4.771 1.865,4.927 0.313,0.156 10 false *1 1.635,5.229 1.948,5.385 0.313,0.156 10 false *a
*1 Hood Lock Control Cable Assembly - -
*a Clamp *b Grommet



b.

Engage the hood lock control cable assembly to the 3 clamps as shown in the illustration and install it.


Hide 53510 2.INSTALL HOOD LOCK ASSEMBLY (w/ Engine Hood Courtesy Switch)

Hide 53510 3.INSTALL HOOD LOCK ASSEMBLY (w/o Engine Hood Courtesy Switch)

a.

Apply MP grease to the sliding areas of the hood lock assembly.


b.

Engage the guide and connect the hood lock control cable assembly.


c.

Install the hood lock assembly with the 3 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 53301 5.ADJUST HOOD SUB-ASSEMBLY

Hide 53141F 7.INSTALL RADIATOR COVER (for Hatchback)

Hide 53876A 8.INSTALL FRONT FENDER LINER LH

Hide 9.INSTALL FRONT WHEEL LH

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)

Hide 53601 10.INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.

Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.


b.

Engage the guide.


c.

Engage the 3 guides and the claw, and install the hood lock control lever sub-assembly.