Home › Vehicle Exterior › DOOR / HATCH › FUEL LID LOCK CONTROL CABLE ASSEMBLY(for TMMIN Made LHD) › 2017.10–2018.01
RM30M0E _59 Vehicle Exterior _017122 DOOR / HATCH _0336624 FUEL LID LOCK CONTROL CABLE ASSEMBLY(for TMMIN Made LHD) A

DOOR / HATCH  FUEL LID LOCK CONTROL CABLE ASSEMBLY(for TMMIN Made LHD)  INSTALLATION  


PROCEDURE

Hide 77035 1.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

a.

Install the fuel lid lock control cable sub-assembly to the 5 clamps as shown in the illustration.

B346790C03
6.469,0.948 6.635,0.948 true 6.417,1.083 6.417,1 false 6.417,2.25 6.521,2.375 true 5.948,3.438 5.875,3.635 false 6.208,3.167 6.125,3.271 true 5.917,4.271 5.938,4.469 true 5.604,4.781 5.604,4.865 false 2.698,4.875 2.75,5.042 true 2.646,5.167 2.802,5.229 true 6.542,2.49 6.542,2.656 false 6.625,0.833 6.938,1.031 0.313,0.198 10 false *1 6.344,1.083 6.656,1.281 0.313,0.198 10 false *2 6.25,2.125 6.563,2.323 0.313,0.198 10 false *1 6.458,2.667 6.771,2.865 0.313,0.198 10 false *2 6.208,3.042 6.521,3.24 0.313,0.198 10 false *1 5.771,3.615 6.083,3.813 0.313,0.198 10 false *2 5.76,4.146 6.073,4.344 0.313,0.198 10 false *1 5.531,4.865 5.844,5.063 0.313,0.198 10 false *2 2.479,5.063 2.792,5.26 0.313,0.198 10 false *1 2.531,4.74 2.844,4.938 0.313,0.198 10 false *2
*1 Fuel Lid Lock Control Cable Sub-assembly *2 Clamp



Hide 77377 2.INSTALL FUEL FILLER OPENING LID LOCK RETAINER

a.

Align the 2 guides with the 2 slits.


b.

Engage the 2 claws and install the fuel filler opening lid lock retainer.


c.

Engage the 2 claws and connect the fuel lid lock control cable sub-assembly to the fuel filler opening lid lock retainer.


Hide 58510D 3.INSTALL FRONT FLOOR CARPET ASSEMBLY

a.

Engage the 2 guides and return the front floor carpet assembly to the left side of the driver side rear floor.


b.

Engage the 5 guides and return the front floor carpet assembly to the driver side front floor.


Hide 77306 4.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

a.

Engage the 2 guides and connect the fuel lid lock control cable sub-assembly and luggage door lock control cable sub-assembly.


b.
B346799

Engage the hook and install the fuel lid lock open lever sub-assembly in the direction indicated by the arrow as shown in the illustration.


c.

Install the screw.


Hide 64722B 5.INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM COVER

a.

Install the No. 2 luggage compartment trim cover with the 4 clips.


Hide 58387 6.INSTALL REAR FLOOR FINISH PLATE

a.

Engage the 4 guides and the 4 claws, and install the rear floor finish plate.


b.

Install the 2 clips.


Hide 64773D 7.INSTALL NO. 2 SPARE WHEEL COVER PAD

a.

Install the No. 2 spare wheel cover pad.


Hide 64770 8.INSTALL SPARE WHEEL COVER ASSEMBLY

a.

Install the spare wheel cover assembly.


Hide 64711 9.INSTALL LUGGAGE COMPARTMENT FLOOR MAT

a.

Install the luggage compartment floor mat.


Hide 62414A 11.INSTALL CENTER PILLAR LOWER GARNISH LH

Hide 73220 12.CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

Hide 62332A 13.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62312B 14.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 16.INSTALL REAR SEAT ASSEMBLY (for Fixed Seat Type)

Hide 17.INSTALL REAR SEAT ASSEMBLY (for Separate Seat Type)