Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL RECEIVER(for TMMIN Made Sedan) › 2017.10–2018.01
RM30M0E _58 Vehicle Interior _017110 DOOR LOCK _0336637 DOOR CONTROL RECEIVER(for TMMIN Made Sedan) A

DOOR LOCK  DOOR CONTROL RECEIVER(for TMMIN Made Sedan)  INSTALLATION  


PROCEDURE

Hide 89741 1.INSTALL DOOR CONTROL RECEIVER

a.

Engage the hook and install the door control receiver.


b.

Install the bolt.

Torque:
8.3 N*m (85 kgf*cm, 73 in.*lbf)


c.

Connect the connector.


Hide 64334 2.INSTALL PACKAGE TRAY TRIM SILENCER PAD

a.

Install the package tray trim silencer pad with the 2 clips.


Hide 64330 3.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

Hide 62471A 5.INSTALL ROOF SIDE INNER GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 62551F 7.INSTALL REAR SEAT SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 73370 8.CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

Hide 73360 9.CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 62332A 10.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62331A 11.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure as for the LH side.


Hide 12.INSTALL REAR SEAT ASSEMBLY (for Fixed Seat Type)

Hide 13.INSTALL REAR SEAT ASSEMBLY (for Separate Seat Type)

Hide 15. REGISTER DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY ID (w/o Smart Entry and Start System)