87103B
1.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY
Install the blower motor with fan sub-assembly with the 3 screws.
Do not apply excessive force to the instrument panel wire.
Connect the connector.
55306A
2.INSTALL NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY
Temporarily install the No. 1 instrument panel brace sub-assembly.
Install the No. 1 instrument panel brace sub-assembly with the bolt, nut and 2 screws.
Engage the 3 clamps.
Return the front floor carpet assembly and install the clip.
Engage the front floor carpet assembly.
55434B
3.INSTALL NO. 2 LOWER CENTER INSTRUMENT PANEL FINISH PANEL
58910C
4.INSTALL REAR CONSOLE BOX ASSEMBLY (for Separate Type)
58910C
5.INSTALL REAR CONSOLE BOX ASSEMBLY (for Integrated Type)
55475A
6.INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55604B
7.INSTALL INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY
55900
8.INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
55902C
9.INSTALL AIR CONDITIONING PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)
55550
10.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
55410C
11.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
55650
12.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
55474C
13.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
14.INSTALL UPPER CENTER INSTRUMENT CLUSTER FINISH PANEL
55411G
15.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL
55432B
16.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL
55606
17.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
18.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)
19.INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)
55412D
20.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL (w/ Radio Receiver)
55412D
21.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL (w/o Radio Receiver)