Use the same procedure for the RHD and LHD vehicles.
The procedure listed below is for the LHD vehicles.
55661A
1.REMOVE INSTRUMENT PANEL REGISTER BEZEL
55411G
2.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL
for LHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>UPPER INSTRUMENT PANEL>REMOVAL
for RHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>UPPER INSTRUMENT PANEL>REMOVAL
45287
3.REMOVE LOWER STEERING COLUMN COVER
45286B
4.REMOVE UPPER STEERING COLUMN COVER
84052
5.REMOVE UNLOCK WARNING SWITCH ASSEMBLY
Insert the key into the ignition key cylinder.
Disconnect the connector.
Disengage the 2 claws and remove the unlock warning switch assembly.