58910C
1.REMOVE REAR CONSOLE BOX ASSEMBLY
58816D
2.REMOVE NO. 1 FRONT CONSOLE BOX INSERT
for LHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>UPPER INSTRUMENT PANEL>REMOVAL
for RHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>LOWER INSTRUMENT PANEL>REMOVAL
58817A
3.REMOVE NO. 2 FRONT CONSOLE BOX INSERT
58911A
4.REMOVE NO. 1 BOX SIDE PANEL
58912C
5.REMOVE NO. 2 BOX SIDE PANEL
58916
6.REMOVE BOX BOTTOM MAT
58839A
7.REMOVE CONSOLE BOX HOLE COVER
58810J
8.REMOVE CONSOLE BOX ASSEMBLY
9.ADJUST SHIFT LEVER POSITION
Apply the parking brake and move the shift lever to N.
| *1 | Adjuster Case |
| *2 | Cover |
Slide the cover in the direction shown by the arrow.
| *1 | Adjuster Case |
| *2 | Lock Piece |
Using a precision screwdriver, pull up the lock piece.
| *1 | Cable Rod |
Using your fingers, gently pull the cable rod towards the rear of the vehicle to remove backlash.
| *1 | Adjuster Case |
| *2 | Lock Piece |
Push in the lock piece to lock it.
| *1 | Adjuster Case |
| *2 | Lock Piece |
| *3 | Cover |
Slide the cover in the direction shown by the arrow.
If the cover is not moved far enough, it will not engage with the lock piece, the cable rod will not be able to lock, and reliable shift operation will not be possible.
58810J
10.INSTALL CONSOLE BOX ASSEMBLY
58839A
11.INSTALL CONSOLE BOX HOLE COVER
58916
12.INSTALL BOX BOTTOM MAT
58912C
13.INSTALL NO. 2 BOX SIDE PANEL
58911A
14.INSTALL NO. 1 BOX SIDE PANEL
58817A
15.INSTALL NO. 2 FRONT CONSOLE BOX INSERT
58816D
16.INSTALL NO. 1 FRONT CONSOLE BOX INSERT
for LHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>UPPER INSTRUMENT PANEL>INSTALLATION
for RHD:
Click hereVehicle Interior>INTERIOR PANELS / TRIM>LOWER INSTRUMENT PANEL>INSTALLATION
58910C
17.INSTALL REAR CONSOLE BOX ASSEMBLY