Home › Engine / Hybrid System › M15A-FKS (ENGINE CONTROL) › SFI SYSTEM › 2020.03–2020.07
RM36W0E _51 Engine / Hybrid System _087499 M15A-FKS ENGINE CONTROL _0418534 SFI SYSTEM J

M15A-FKS ENGINE CONTROL  SFI SYSTEM  VC Output Circuit  


DESCRIPTION

The ECM constantly generates a 5 V power source voltage from the battery voltage supplied to the +B, +B2 (BATT) terminals to operate the microprocessor. The ECM also provides this power to the sensors through the VC output circuit.

A461591E01
0.958,0.833 2.771,1.135 1.813,0.302 10 false from EFI-MAIN NO. 1 Fuse 0.917,1.177 2.677,1.531 1.76,0.354 10 false from EFI-MAIN NO. 1 Relay 0.135,1.969 2.625,2.469 2.49,0.5 10 false to Throttle Position Sensor, Accelerator Pedal Sensor Assembly, etc. (Sensors which have an IC) 0.135,2.646 2.563,3.031 2.427,0.385 10 false to Engine Coolant Temperature Sensor, Intake Air Temperature Sensor, etc. 4.969,3.094 5.313,3.406 0.344,0.313 10 false ECM 2.885,0.677 3.563,1 0.677,0.323 10 false BATT 2.823,1.042 3.49,1.292 0.667,0.25 10 false +B, +B2 3.063,2.021 3.427,2.25 0.365,0.229 10 false VC 4.396,0.875 6.188,1.229 1.792,0.354 10 false 5 V Constant Voltage Circuit 5.365,1.76 6.354,2.115 0.99,0.354 10 false Microprocessor 4.073,2.844 4.333,3.063 0.26,0.219 10 false R

When the VC circuit has a short circuit, the microprocessor in the ECM and sensors that are supplied power through the VC circuit are deactivated because power is not supplied from the VC circuit. When the system is in this condition, it will not start.

WIRING DIAGRAM

·

For the circuit diagram of the ECM power source refer to the ECM power source circuit.

Click hereEngine / Hybrid System>M15A-FKS (ENGINE CONTROL)>SFI SYSTEM>ECM Power Source Circuit

·

VC Output Circuit

A425734E16
0.542,0.354 0.854,0.552 0.313,0.198 10 false D18 0.552,0.542 1.698,0.99 1.146,0.448 10 false Throttle Body with Motor Assembly 0.531,1.854 0.844,2.052 0.313,0.198 10 false e4 0.521,2.021 2.302,2.24 1.781,0.219 10 false Crankshaft Position Sensor 0.521,3.146 0.833,3.344 0.313,0.198 10 false D7 0.531,3.333 2.146,3.719 1.615,0.385 10 false Camshaft Position Sensor (for Intake Camshaft) 0.521,4.448 0.833,4.646 0.313,0.198 10 false D8 0.521,4.635 2.135,5.021 1.615,0.385 10 false Camshaft Position Sensor (for Exhaust Camshaft) 0.521,5.688 0.865,5.896 0.344,0.208 10 false D20 0.521,5.865 2.229,6.229 1.708,0.365 10 false Manifold Absolute Pressure Sensor 0.542,7.073 0.854,7.25 0.313,0.177 10 false D32 0.552,7.24 2.083,7.698 1.531,0.458 10 false Engine Oil Pressure and Temperature Sensor 2.531,0.281 2.781,0.448 0.25,0.167 10 false VC 2.552,0.646 2.771,0.823 0.219,0.177 10 false E2 2.458,1 2.781,1.188 0.323,0.188 10 false VTA 2.396,1.385 2.771,1.563 0.375,0.177 10 false VTA2 2.865,0.531 3.115,0.698 0.25,0.167 10 false 4 2.865,0.177 3.115,0.344 0.25,0.167 10 false 2 2.875,0.906 3.125,1.073 0.25,0.167 10 false 1 2.865,1.26 3.115,1.427 0.25,0.167 10 false 3 2.875,1.781 3.125,1.948 0.25,0.167 10 false 3 2.875,2.146 3.125,2.313 0.25,0.167 10 false 2 2.865,2.521 3.115,2.688 0.25,0.167 10 false 1 2.875,3.052 3.125,3.219 0.25,0.167 10 false 3 2.865,3.417 3.115,3.583 0.25,0.167 10 false 2 2.865,3.76 3.115,3.927 0.25,0.167 10 false 1 2.865,4.729 3.115,4.896 0.25,0.167 10 false 2 2.865,5.073 3.115,5.24 0.25,0.167 10 false 1 2.875,4.354 3.125,4.521 0.25,0.167 10 false 3 2.854,5.646 3.104,5.813 0.25,0.167 10 false 3 2.854,6.021 3.104,6.188 0.25,0.167 10 false 1 2.844,6.375 3.094,6.542 0.25,0.167 10 false 2 2.854,6.969 3.104,7.135 0.25,0.167 10 false 3 2.854,7.313 3.104,7.479 0.25,0.167 10 false 2 2.865,7.708 3.115,7.875 0.25,0.167 10 false 1 2.865,8.094 3.115,8.26 0.25,0.167 10 false 4 2.344,1.885 2.76,2.063 0.417,0.177 10 false VCNE 2.458,2.229 2.75,2.406 0.292,0.177 10 false NE- 2.448,2.604 2.76,2.781 0.313,0.177 10 false NE+ 2.51,3.125 2.76,3.292 0.25,0.167 10 false VC 2.427,3.51 2.75,3.698 0.323,0.188 10 false VVI- 2.438,3.865 2.76,4.052 0.323,0.188 10 false VVI+ 2.448,4.469 2.76,4.646 0.313,0.177 10 false VC2 2.365,4.823 2.75,5.01 0.385,0.188 10 false VVE- 2.344,5.188 2.844,5.375 0.5,0.188 10 false VVE+ 2.521,5.76 2.771,5.927 0.25,0.167 10 false VC 2.542,6.125 2.76,6.302 0.219,0.177 10 false E2 2.469,6.479 2.75,6.656 0.281,0.177 10 false PIM 2.49,7.083 2.74,7.25 0.25,0.167 10 false VC 2.417,7.438 2.781,7.635 0.365,0.198 10 false GND 2.375,7.813 2.781,8.021 0.406,0.208 10 false POUT 2.375,8.208 2.76,8.396 0.385,0.188 10 false TOUT 4.948,0.208 5.219,0.375 0.271,0.167 10 false 109 4.948,0.573 5.219,0.74 0.271,0.167 10 false 110 4.938,0.927 5.208,1.094 0.271,0.167 10 false 108 5,1.302 5.198,1.469 0.198,0.167 10 false 87 4.927,1.771 5.198,1.938 0.271,0.167 10 false 116 4.927,2.135 5.198,2.302 0.271,0.167 10 false 115 5,2.51 5.198,2.677 0.198,0.167 10 false 92 4.99,3.083 5.188,3.25 0.198,0.167 10 false 88 5,3.448 5.198,3.615 0.198,0.167 10 false 89 5,3.813 5.198,3.979 0.198,0.167 10 false 90 4.927,4.385 5.198,4.552 0.271,0.167 10 false 113 4.938,4.75 5.208,4.917 0.271,0.167 10 false 114 5.01,5.135 5.208,5.302 0.198,0.167 10 false 91 4.938,5.677 5.208,5.844 0.271,0.167 10 false 121 4.938,6.021 5.208,6.188 0.271,0.167 10 false 119 4.938,6.406 5.208,6.573 0.271,0.167 10 false 120 5.01,7.01 5.198,7.188 0.188,0.177 10 false 99 4.938,7.375 5.208,7.542 0.271,0.167 10 false 100 4.938,7.75 5.208,7.917 0.271,0.167 10 false 122 4.948,8.156 5.219,8.323 0.271,0.167 10 false 123 5.188,8.656 5.49,8.833 0.302,0.177 10 false D51 5.521,8.667 5.958,8.854 0.438,0.188 10 false ECM 6.271,0.146 6.542,0.313 0.271,0.167 10 false 5 V 5.302,0.219 5.708,0.396 0.406,0.177 10 false VCTA 5.302,0.573 5.625,0.75 0.323,0.177 10 false ETA 5.313,1.021 5.698,1.208 0.385,0.188 10 false VTA1 5.302,1.375 5.688,1.563 0.385,0.188 10 false VTA2 5.302,1.771 5.729,1.948 0.427,0.177 10 false VCNE 5.302,2.125 5.615,2.302 0.313,0.177 10 false NE- 5.302,2.625 5.615,2.802 0.313,0.177 10 false NE+ 5.302,3.073 5.729,3.25 0.427,0.177 10 false VCV1 5.302,3.438 5.729,3.615 0.427,0.177 10 false VV1- 5.302,3.896 5.729,4.073 0.427,0.177 10 false VV1+ 5.281,4.385 5.708,4.563 0.427,0.177 10 false VCE1 5.302,4.75 5.729,4.927 0.427,0.177 10 false EV1- 5.302,5.198 5.729,5.375 0.427,0.177 10 false EV1+ 5.302,5.677 5.76,5.865 0.458,0.188 10 false VCPM 5.302,6.031 5.719,6.208 0.417,0.177 10 false EPIM 5.302,6.49 5.625,6.677 0.323,0.188 10 false PIM 5.302,7 5.74,7.188 0.438,0.188 10 false VCPE 5.292,7.375 5.729,7.563 0.438,0.188 10 false EPEO 5.302,7.823 5.656,8.01 0.354,0.188 10 false PEO 5.302,8.219 5.75,8.406 0.448,0.188 10 false THEO

A460022E01
0.531,0.802 0.99,1 0.458,0.198 10 false A62 0.542,1.021 1.708,1.479 1.167,0.458 10 false Accelerator Pedal Sensor Assembly 2.51,1.51 2.917,1.76 0.406,0.25 10 false EPA 2.448,1.875 2.823,2.115 0.375,0.24 10 false EPA2 2.5,2.24 2.875,2.479 0.375,0.24 10 false VPA 2.427,2.594 2.802,2.833 0.375,0.24 10 false VPA2 2.896,1.396 3.177,1.615 0.281,0.219 10 false 5 2.896,1.781 3.177,2 0.281,0.219 10 false 2 2.896,2.135 3.177,2.354 0.281,0.219 10 false 6 2.906,2.49 3.188,2.708 0.281,0.219 10 false 3 4.969,1.698 5.25,1.917 0.281,0.219 10 false 59 4.958,1.333 5.24,1.552 0.281,0.219 10 false 56 4.969,2.073 5.25,2.292 0.281,0.219 10 false 55 4.969,2.438 5.25,2.656 0.281,0.219 10 false 58 5.333,1.427 5.74,1.646 0.406,0.219 10 false EPA 5.333,1.781 5.74,2 0.406,0.219 10 false EPA2 5.333,2.24 5.74,2.458 0.406,0.219 10 false VPA 5.323,2.604 5.729,2.823 0.406,0.219 10 false VPA2 0.51,3.156 0.969,3.354 0.458,0.198 10 false D23 0.5,3.344 1.844,3.854 1.344,0.51 10 false Mass Air Flow Meter Sub-assembly 2.479,3.177 2.823,3.417 0.344,0.24 10 false VCC 2.49,3.542 2.792,3.781 0.302,0.24 10 false E2G 2.573,3.906 2.875,4.146 0.302,0.24 10 false FG 2.5,4.26 2.802,4.5 0.302,0.24 10 false THA 5.333,3.073 5.74,3.292 0.406,0.219 10 false VCVG 5.344,3.427 5.75,3.646 0.406,0.219 10 false E2G 5.333,3.906 5.74,4.125 0.406,0.219 10 false VG 5.323,4.271 5.729,4.49 0.406,0.219 10 false THA 2.906,3.083 3.188,3.302 0.281,0.219 10 false 4 2.917,3.448 3.198,3.667 0.281,0.219 10 false 2 2.906,3.792 3.188,4.01 0.281,0.219 10 false 3 2.917,4.146 3.198,4.365 0.281,0.219 10 false 1 4.958,2.99 5.229,3.188 0.271,0.198 10 false 78 4.969,3.365 5.24,3.563 0.271,0.198 10 false 79 4.917,3.729 5.198,3.948 0.281,0.219 10 false 101 4.917,4.094 5.198,4.313 0.281,0.219 10 false 102 0.531,4.688 0.99,4.885 0.458,0.198 10 false e2 0.531,4.854 2.448,5.281 1.917,0.427 10 false Fuel Pressure Sensor (for High Pressure Side) 2.573,4.719 2.875,4.958 0.302,0.24 10 false VC 2.594,5.083 2.865,5.323 0.271,0.24 10 false E2 2.563,5.448 2.969,5.667 0.406,0.219 10 false PR 5.323,4.615 5.729,4.833 0.406,0.219 10 false VCPR 5.333,4.979 5.74,5.198 0.406,0.219 10 false EPR 5.344,5.448 5.75,5.667 0.406,0.219 10 false PR 2.906,4.615 3.188,4.833 0.281,0.219 10 false 1 2.906,4.979 3.188,5.198 0.281,0.219 10 false 2 2.906,5.344 3.188,5.563 0.281,0.219 10 false 3 4.958,4.531 5.229,4.729 0.271,0.198 10 false 98 4.969,4.906 5.24,5.104 0.271,0.198 10 false 96 4.958,5.271 5.229,5.469 0.271,0.198 10 false 97 0.542,5.958 1,6.156 0.458,0.198 10 false D27 0.521,6.146 2.417,6.469 1.896,0.323 10 false Fuel Pressure Sensor (for Low Pressure Side) 2.594,5.979 2.896,6.219 0.302,0.24 10 false VC 2.615,6.354 2.885,6.594 0.271,0.24 10 false E2 2.896,5.844 3.177,6.063 0.281,0.219 10 false 1 2.896,6.208 3.177,6.427 0.281,0.219 10 false 3 2.906,6.604 3.188,6.823 0.281,0.219 10 false 2 5.323,5.865 5.729,6.083 0.406,0.219 10 false VCPF 5.323,6.229 5.729,6.448 0.406,0.219 10 false EPFL 5.333,6.688 5.74,6.906 0.406,0.219 10 false PFL 4.958,5.781 5.229,5.979 0.271,0.198 10 false 84 4.969,6.167 5.24,6.365 0.271,0.198 10 false 61 4.917,6.521 5.198,6.74 0.281,0.219 10 false 107 5.74,8.469 6.177,8.698 0.438,0.229 10 false ECM 2.531,6.708 2.938,6.927 0.406,0.219 10 false PFL 2.417,1.135 3.031,1.333 0.615,0.198 10 false VCP2 2.396,0.792 3.01,0.99 0.615,0.198 10 false VCPA 2.885,1.01 3.042,1.208 0.156,0.198 10 false 1 2.885,0.677 3.042,0.875 0.156,0.198 10 false 4 5.323,1.052 5.938,1.25 0.615,0.198 10 false VCP2 5.333,0.688 5.948,0.885 0.615,0.198 10 false VCPA 4.958,0.979 5.271,1.177 0.313,0.198 10 false 60 4.979,0.604 5.292,0.802 0.313,0.198 10 false 57 4.917,0.781 5.375,0.979 0.458,0.198 10 false A54 4.927,3.177 5.385,3.375 0.458,0.198 10 false D51 4.917,1.146 5.375,1.344 0.458,0.198 10 false A54 4.917,1.51 5.375,1.708 0.458,0.198 10 false A54 4.917,1.885 5.375,2.083 0.458,0.198 10 false A54 4.917,2.24 5.375,2.438 0.458,0.198 10 false A54 4.917,2.604 5.375,2.802 0.458,0.198 10 false A54 4.958,7.042 5.229,7.24 0.271,0.198 10 false 83 4.958,7.427 5.229,7.625 0.271,0.198 10 false 60 4.917,7.792 5.219,7.99 0.302,0.198 10 false 106 2.896,7.104 3.177,7.323 0.281,0.219 10 false 1 2.896,7.49 3.177,7.708 0.281,0.219 10 false 3 2.906,7.865 3.188,8.083 0.281,0.219 10 false 2 2.594,7.229 3,7.448 0.406,0.219 10 false W1 2.604,7.594 3.01,7.813 0.406,0.219 10 false F+ 2.49,7.969 2.896,8.188 0.406,0.219 10 false TMN 0.552,7.188 0.958,7.406 0.406,0.219 10 false D44 0.531,7.375 2.427,7.698 1.896,0.323 10 false Neutral Position Switch* 5.333,7.135 5.844,7.354 0.51,0.219 10 false VCNP 5.333,7.51 5.844,7.729 0.51,0.219 10 false ENPS 5.333,7.958 5.844,8.177 0.51,0.219 10 false NPSW 4.927,3.552 5.385,3.75 0.458,0.198 10 false D51 4.927,3.906 5.385,4.104 0.458,0.198 10 false D51 4.927,4.271 5.385,4.469 0.458,0.198 10 false D51 4.927,4.719 5.385,4.917 0.458,0.198 10 false D51 4.927,5.094 5.385,5.292 0.458,0.198 10 false D51 4.927,5.448 5.385,5.646 0.458,0.198 10 false D51 4.927,5.969 5.385,6.167 0.458,0.198 10 false D51 4.927,6.344 5.385,6.542 0.458,0.198 10 false D51 4.927,6.708 5.385,6.906 0.458,0.198 10 false D51 4.927,7.219 5.385,7.417 0.458,0.198 10 false D51 4.927,7.604 5.385,7.802 0.458,0.198 10 false D51 4.927,7.958 5.385,8.156 0.458,0.198 10 false D51 0.51,8.5 2.708,8.729 2.198,0.229 10 false *: for Manual Transaxle Models


CAUTION / NOTICE / HINT

NOTICE:

Check the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.CHECK CONNECTION BETWEEN GTS AND ECM
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

2.CHECK EFI NO. 1 FUSE VOLTAGE

B

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

2.CHECK EFI NO. 1 FUSE VOLTAGE
A460030C01
1.521,3 1.625,3 1.625,3 2.083,1.802 true 0.094,0.104 0.406,0.26 0.313,0.156 10 false *1 1.323,2.948 1.635,3.104 0.313,0.156 10 false *2
*1 No. 1 Engine Room Relay Block and Junction Block Assembly
*2 EFI NO. 1 Fuse


a.

Turn the ignition switch to ON.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
1 (EFI NO. 1 fuse) - Body ground Ignition switch ON 11 to 14 V


HINT:
·

Check the fuse with it installed to the No. 1 engine room relay block and junction block assembly.

·

If the result is not as specified, since current is not flowing to the +B and +B2 terminals of the ECM, the system may not be started.




Result:
Proceed to
OK
NG



OK

3.CHECK CONNECTION BETWEEN GTS AND ECM (THROTTLE POSITION SENSOR)

NG

3.CHECK CONNECTION BETWEEN GTS AND ECM (THROTTLE POSITION SENSOR)
a.

Disconnect the throttle body with motor assembly connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

4.CHECK CONNECTION BETWEEN GTS AND ECM (ACCELERATOR PEDAL POSITION SENSOR)

B

REPLACE THROTTLE BODY WITH MOTOR ASSEMBLY

Click hereEngine / Hybrid System>M15A-FKS (ENGINE CONTROL)>THROTTLE BODY>REMOVAL

HINT:

Perform "Inspection After Repair" after replacing the throttle body with motor assembly.

Click hereEngine / Hybrid System>M15A-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION



4.CHECK CONNECTION BETWEEN GTS AND ECM (ACCELERATOR PEDAL POSITION SENSOR)
a.

Disconnect the accelerator pedal sensor assembly connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

5.CHECK CONNECTION BETWEEN GTS AND ECM (CRANKSHAFT POSITION SENSOR)

B

REPLACE ACCELERATOR PEDAL(W/SENSOR) ROD ASSEMBLY

5.CHECK CONNECTION BETWEEN GTS AND ECM (CRANKSHAFT POSITION SENSOR)
a.

Disconnect the crankshaft position sensor connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

6.CHECK CONNECTION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR (FOR INTAKE CAMSHAFT))

B

6.CHECK CONNECTION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR (FOR INTAKE CAMSHAFT))
a.

Disconnect the camshaft position sensor (for intake camshaft) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

7.CHECK CONNECTION BETWEEN GTS AND ECM (MANIFOLD ABSOLUTE PRESSURE SENSOR)

B

REPLACE CAMSHAFT POSITION SENSOR (FOR INTAKE CAMSHAFT)

7.CHECK CONNECTION BETWEEN GTS AND ECM (MANIFOLD ABSOLUTE PRESSURE SENSOR)
a.

Disconnect the manifold absolute pressure sensor connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

8.CHECK CONNECTION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR (FOR EXHAUST CAMSHAFT))

B

REPLACE MANIFOLD ABSOLUTE PRESSURE SENSOR

8.CHECK CONNECTION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR (FOR EXHAUST CAMSHAFT))
a.

Disconnect the camshaft position sensor (for exhaust camshaft) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

9.CHECK CONNECTION BETWEEN GTS AND ECM (ENGINE OIL PRESSURE AND TEMPERATURE SENSOR)

B

REPLACE CAMSHAFT POSITION SENSOR (FOR EXHAUST CAMSHAFT)

9.CHECK CONNECTION BETWEEN GTS AND ECM (ENGINE OIL PRESSURE AND TEMPERATURE SENSOR)
a.

Disconnect the engine oil pressure and temperature sensor connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

10.CHECK CONNECTION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR (FOR HIGH PRESSURE SIDE))

B

REPLACE ENGINE OIL PRESSURE AND TEMPERATURE SENSOR

10.CHECK CONNECTION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR (FOR HIGH PRESSURE SIDE))
a.

Disconnect the fuel pressure sensor (for high pressure side) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

11.CHECK CONNECTION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR (FOR LOW PRESSURE SIDE))

B

REPLACE FUEL PRESSURE SENSOR (FOR HIGH PRESSURE SIDE)

Click hereEngine / Hybrid System>M15A-FKS (FUEL)>FUEL PRESSURE SENSOR (for High Pressure)>REMOVAL

HINT:

Perform "Inspection After Repair" after replacing the fuel pressure sensor (for high pressure side).

Click hereEngine / Hybrid System>M15A-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION



11.CHECK CONNECTION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR (FOR LOW PRESSURE SIDE))
a.

Disconnect the fuel pressure sensor (for low pressure side) connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

12.CHECK CONNECTION BETWEEN GTS AND ECM (MASS AIR FLOW METER SUB-ASSEMBLY)

B

REPLACE FUEL PRESSURE SENSOR (FOR LOW PRESSURE SIDE)

Click hereEngine / Hybrid System>M15A-FKS (FUEL)>FUEL PRESSURE SENSOR>REMOVAL

HINT:

Perform "Inspection After Repair" after replacing the fuel pressure sensor (for low pressure side).

Click hereEngine / Hybrid System>M15A-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION



12.CHECK CONNECTION BETWEEN GTS AND ECM (MASS AIR FLOW METER SUB-ASSEMBLY)
a.

Disconnect the mass air flow meter sub-assembly connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible (for continuously variable transaxle models) A
Communication is not possible (for manual transaxle models) B
Communication is possible C



A

14.CHECK HARNESS AND CONNECTOR

B

13.CHECK CONNECTION BETWEEN GTS AND ECM (NEUTRAL POSITION SWITCH)

C

REPLACE MASS AIR FLOW METER SUB-ASSEMBLY

Click hereEngine / Hybrid System>M15A-FKS (ENGINE CONTROL)>MASS AIR FLOW METER>REMOVAL

HINT:

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>M15A-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION



13.CHECK CONNECTION BETWEEN GTS AND ECM (NEUTRAL POSITION SWITCH)
a.

Disconnect the neutral position switch connector.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

14.CHECK HARNESS AND CONNECTOR

B

14.CHECK HARNESS AND CONNECTOR
a.

Disconnect the throttle body with motor assembly connector.


b.

Disconnect the crankshaft position sensor connector.


c.

Disconnect the camshaft position sensor (for intake camshaft) connector.


d.

Disconnect the camshaft position sensor (for exhaust camshaft) connector.


e.

Disconnect the manifold absolute pressure sensor connector.


f.

Disconnect the engine oil pressure and temperature sensor connector.


g.

Disconnect the accelerator pedal sensor assembly connector.


h.

Disconnect the mass air flow meter sub-assembly connector.


i.

Disconnect the fuel pressure sensor (for high pressure side) connector.


j.

Disconnect the fuel pressure sensor (for low pressure side) connector.


k.

Disconnect the neutral position switch connector (for manual transaxle models).


l.

Disconnect the ECM connectors.


m.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
D51-109 (VCTA) - Body ground Always 10 kΩ or higher
D51-116 (VCNE) - Body ground Always 10 kΩ or higher
D51-88 (VCV1) - Body ground Always 10 kΩ or higher
D51-113 (VCE1) - Body ground Always 10 kΩ or higher
D51-121 (VCPM) - Body ground Always 10 kΩ or higher
D51-99 (VCPE) - Body ground Always 10 kΩ or higher
A54-57 (VCPA) - Body ground Always 10 kΩ or higher
A54-60 (VCP2) - Body ground Always 10 kΩ or higher
D51-78 (VCVG) - Body ground Always 10 kΩ or higher
D51-98 (VCPR) - Body ground Always 10 kΩ or higher
D51-84 (VCPF) - Body ground Always 10 kΩ or higher
D51-83 (VCNP)* - Body ground Always 10 kΩ or higher
A54-9 (+B) - 1 (EFI NO. 2 fuse) Always Below 1 Ω
A54-35 (+B2) - 1 (EFI NO. 2 fuse) Always Below 1 Ω


*: for manual transaxle models


Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR