Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID BATTERY SYSTEM
RM36W0E _51 Engine / Hybrid System _087936 HYBRID / BATTERY CONTROL _0420053 HYBRID BATTERY SYSTEM T

HYBRID / BATTERY CONTROL  HYBRID BATTERY SYSTEM  PROBLEM SYMPTOMS TABLE  


Hybrid Battery System
Symptom Suspected Area Link
"Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display.* 1. Make sure the HV battery cooling system intake port is not blocked. -
2. Make sure there are no gaps between the connecting parts of the ducts. -
3. Clean the No. 1 HV battery intake filter.
Check for entry of foreign matter.
Click here
4. Clear the DTCs to reset the learning values even if no DTCs are stored. Click here
Abnormal sound is heard from the area around the hybrid battery intake duct. 1. Make sure the HV battery cooling system intake port is not blocked. -
2. Make sure there are no gaps between the connecting parts of the ducts. -
3. Clean the No. 1 HV battery intake filter.
Check for entry of foreign matter.
Click here
4. Clear the DTCs to reset the learning values even if no DTCs are stored. Click here
"Have Traction Battery Inspected" is displayed on the multi-information display. "Have Traction Battery Inspected" is displayed. Click here
Ignition switch does not turn to ON (READY). Smart entry and start system (for start function) Click here
ECU power source circuit (Hybrid battery system) Click here
ECU power source circuit (Hybrid control system) Click here
Check vehicle control history
(Ready ON Prevention)
Click here
The ignition switch is slow to turn to ON (READY). Check vehicle control history
(Ready ON Prevention)
Click here
Engine stops and starts less frequently. Check vehicle control history
(Limit to Charge / Discharge Control Value by Hybrid Battery)
Click here
Engine speed returns to idle slowly after accelerator pedal is fully released. Check vehicle control history
(Limit to Charge / Discharge Control Value by Hybrid Battery)
Click here

*: If the battery cooling blower assembly malfunctions, DTC P0A8100, P0A8111, P0A8115, P0A814B, P0A8196 or P0A8198 will be stored. If only "Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display, only perform the inspection of the HV battery cooling system intake port, filter and duct.