Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL (for Gasoline Model) › 2020.03–2020.07
RM36W0E _54 Brake _088656 BRAKE SYSTEM (OTHER) _0422044 BRAKE PEDAL(for Gasoline Model) A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for Gasoline Model)  INSTALLATION  


PROCEDURE

Hide 47121 1.INSTALL BRAKE PEDAL PAD

a.

Install the brake pedal pad from the brake pedal support assembly.


Hide 47110 2.INSTALL BRAKE PEDAL SUPPORT ASSEMBLY

a.

Temporarily install the brake pedal support assembly with the 2 bolts and 2 nuts.


b.
C429823E01
2.375,1.635 2.49,1.833 0.115,0.198 10 true 1 0.854,0.573 0.969,0.771 0.115,0.198 10 true 3 0.75,1.51 0.865,1.708 0.115,0.198 10 true 2 2.156,0.229 2.354,0.427 0.198,0.198 10 true 4

Tighten the 2 nuts and 2 bolts in the order shown in the illustration.

Torque:
12.7 N*m (130 kgf*cm, 9 ft.*lbf)


c.

Install 2 new clips.


d.

Engage the 3 clamps to install the wire harness to the brake pedal support assembly.


e.

Engage the clamp to install the wire harness to the brake pedal support assembly.


Hide 47264A 3.INSTALL PUSH ROD PIN

a.
C429825C01
0,0 0,0 false
V100135

Lithium soap base glycol grease


Apply lithium soap base glycol grease to the push rod pin and installation hole of the brake pedal support assembly.


b.

Connect the brake master cylinder push rod clevis to the brake pedal support assembly with the push rod pin, and install a new clip.

NOTICE:

Be sure to install the push rod pin in the correct direction.



Hide 47101A 4.INSTALL BRAKE PEDAL RETURN SPRING

a.

Install the brake pedal return spring to the brake pedal support assembly and push rod pin.


Hide 84345 5.INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

Hide 84340 6.INSTALL STOP LIGHT SWITCH ASSEMBLY

Hide 7.INSTALL STEERING COLUMN ASSEMBLY