G9508
1.INSTALL NO. 1 HV SUPPLY STACK SUB-ASSEMBLY
Be sure to wear insulated gloves and protective goggles.
Install the No. 1 HV supply stack sub-assembly with the 4 nuts.
Engage the 2 clamps.
G9509
2.INSTALL NO. 2 HV SUPPLY STACK SUB-ASSEMBLY
Be sure to wear insulated gloves and protective goggles.
Install the No. 2 HV supply stack sub-assembly with the 4 nuts.
Engage the claw.
Connect the connector.
Make sure that the connector is connected securely.
Connect the connector.
Make sure that the connector is connected securely.
G92PC
3.INSTALL NO. 1 HV BATTERY PROTECTOR
Engage the 2 claws to install the No. 1 hybrid battery protector to the No. 1 HV supply stack sub-assembly.
89890A
4.INSTALL BATTERY ECU ASSEMBLY
G920Q
5.INSTALL NO. 1 HYBRID BATTERY SHIELD SUB-ASSEMBLY
Install the No. 1 hybrid battery shield sub-assembly with the 2 bolts and nut.
G929A
6.INSTALL NO. 1 HV BATTERY HOSE
G92E1A
7.INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT
Be sure to wear insulated gloves and protective goggles.
Install the No. 1 hybrid battery intake duct to the HV battery with the clip.
Engage the claw of hybrid battery thermistor (sensor portion) to connect the hybrid battery thermistor to the No. 1 hybrid battery intake duct.
G92Z2
8.INSTALL HYBRID BATTERY TERMINAL BLOCK
G3850
9.INSTALL NO. 1 TRACTION BATTERY DEVICE BOX ASSEMBLY
G920NB
10.INSTALL UPPER HV BATTERY COVER SUB-ASSEMBLY
G9510
11.INSTALL HV BATTERY
12. PERFORM UTILITY
Perform "Battery Status Info Update" after replacing a malfunctioning HV supply stack sub-assembly.
Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID BATTERY SYSTEM>UTILITY
Perform "Prediagnostic Battery Charge" after replacing a malfunctioning HV supply stack sub-assembly.
Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID BATTERY SYSTEM>UTILITY
Perform "Battery Diagnosis" after replacing a malfunctioning HV supply stack sub-assembly.
Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID BATTERY SYSTEM>UTILITY