46430
1.INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY (for Gasoline Model)
Install the No. 3 parking brake cable assembly with the 4 bolts and nut.
46430
2.INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY (for HV Model)
Install the No. 3 parking brake cable assembly with the 4 bolts and nut.
46420
3.INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY (for Gasoline Model)
Install the No. 3 parking brake cable assembly with the 5 bolts and nut.
46420
4.INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY (for HV Model)
Install the No. 3 parking brake cable assembly with the 5 bolts and nut.
77606
5.INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY
58153
6.INSTALL FRONT NO. 2 FLOOR HEAT INSULATOR
17410
7.INSTALL FRONT EXHAUST PIPE ASSEMBLY
for HV Model:
Click hereEngine / Hybrid System>M15A-FXE (INTAKE / EXHAUST)>EXHAUST MANIFOLD>INSTALLATION
for Gasoline Model:
Click hereEngine / Hybrid System>M15A-FKS (INTAKE / EXHAUST)>EXHAUST MANIFOLD>INSTALLATION
46410
8.INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY
Engage the 2 claws to install the parking brake cable end stopper and No. 1 parking brake cable assembly to the parking brake equalizer.
Engage the 2 claws to install the No. 1 parking brake cable assembly to the parking brake cable end stopper.
46201E
9.INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY
04495
10.INSTALL REAR BRAKE SHOE KIT
11.ADJUST PARKING BRAKE LEVER TRAVEL
58857A
12.INSTALL UPPER NO. 1 CONSOLE SUPPORT BRACKET
58903A
13.INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
58911A
14.INSTALL NO. 1 BOX SIDE PANEL
58912C
15.INSTALL NO. 2 BOX SIDE PANEL
16.INSPECT FOR EXHAUST GAS LEAK
for M15A-FKS:
Click hereEngine / Hybrid System>M15A-FKS (INTAKE / EXHAUST)>EXHAUST PIPE>INSTALLATION
for M15A-FXE:
Click hereEngine / Hybrid System>M15A-FXE (INTAKE / EXHAUST)>EXHAUST PIPE>INSTALLATION
17.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for HV Model)
18. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL (for HV Model)
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART