Home › Suspension › TIRE / WHEEL › TIRE AND WHEEL SYSTEM › 2020.07–2020.09
RM36W0E _53 Suspension _087548 TIRE / WHEEL _0424119 TIRE AND WHEEL SYSTEM G

TIRE / WHEEL  TIRE AND WHEEL SYSTEM  INSPECTION  


PROCEDURE

Hide 1.INSPECT TIRES

a.

Inspect the tires for wear and proper inflation pressure.

Cold Tire Inflation Pressure:
Tire Size Front
kPa (kgf/cm2, psi)
Rear
kPa (kgf/cm2, psi)

*1: for driving under 160 km/h (99 mph)

*2: for driving at 160 km/h (99 mph) or over

175/70R14 84S 250 (2.5, 36) 240 (2.4, 35)
185/60R15 84H 230 (2.3, 33) 220 (2.2, 32)
185/65R15 88H 230 (2.3, 33)*1
250 (2.5, 36)*2
220 (2.2, 32)*1
240 (2.4, 35)*2
280 (2.8, 41) 280 (2.8, 41)
185/55R16 83V 220 (2.2, 32)*1
230 (2.3, 33)*2
210 (2.1, 30)*1
220 (2.2, 32)*2
195/55R16 87V 220 (2.2, 32)*1
240 (2.4, 35)*2
200 (2.0, 29)*1
220 (2.2, 32)*2
205/45R17 84W 220 (2.2, 32) 200 (2.0, 29)


NOTICE:

For 185/65R15 88H tire, 2 different values of pressure are available. Refer to the tire pressure information label on the vehicle.


Cold Tire Inflation Pressure (for Compact Spare Tire):
Tire Size kPa (kgf/cm2, psi)
T125/70D16 96M 420 (4.2, 60)


i.

Perform the tire pressure warning system initialization.

Click hereSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING SYSTEM>INITIALIZATION


ii.

Tire pressure adjustment method when warm:

1.

On the GTS screen, display "Tire Inflation Pressure" of Data List.

2.

Adjust the tire pressure so that the displayed value is equal to the set pressure.

3.

Perform initialization and check that initialization completes.

Click hereSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING SYSTEM>INITIALIZATION

4.

Check and record the value of the Data List item "Temperature in Tire". (Ts)

5.

Check and record the ambient temperature during tire pressure adjustment. (Tm)

6.

Readjust the tire pressure according to the difference between the tire internal temperature (Ts) and the ambient temperature (Tm). (P)

HINT:

Tire internal temperature: Ts, Ambient temperature: Tm, Tire pressure readjustment value: P

P = (Specified Pressure) + (Ts - Tm)


7.

Check the pressure adjustment value with the Data List item "Tire Inflation Pressure".


NOTICE:

Check the tire pressure warning system for the relationship between the inflation pressure and tire pressure warning pressure.

Click hereSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING




b.
C137874

Using a dial indicator, check the runout of the tires.

Maximum Tire Runout:

1.4 mm (0.0551 in.)



Hide 2. ROTATE TIRES

a.

Remove the wheel assembly.

Click hereGeneral>MAINTENANCE>TIRE AND WHEEL>REMOVAL


b.
C163156C01
0,0 0,0 false
V100135

Front


Rotate the tires as shown in the illustration.


c.

Install the wheel assembly.

Click hereGeneral>MAINTENANCE>TIRE AND WHEEL>INSTALLATION


d.

Perform the tire pressure warning system initialization.

Click hereSuspension>TIRE PRESSURE MONITORING>TIRE PRESSURE WARNING SYSTEM>INITIALIZATION


Hide 3.INSPECT AND ADJUST WHEEL BALANCE

a.

Inspect and adjust the off-the-car balance.

i.

for Steel Wheel:

Maximum Wheel Imbalance:

8.0 g (0.0176 lb)


HINT:
·

Use clip-on type balance weights for both the inner and outer side.

·

If the tires vibrate even after the off-the-car balance adjustment, adjust the wheel balance with on-the-car balancing as necessary.




ii.
C249286C01
0.625,3.521 0.938,3.677 0.313,0.156 10 false *a 2.073,3.656 2.385,3.813 0.313,0.156 10 false *a
*a 25 mm (0.984 in.)


for TMMF Made 15 inch Aluminum Wheel:

Maximum Wheel Imbalance:

8.0 g (0.0176 lb)


NOTICE:
·

Use a cleaning detergent to remove dirt, oil and water from the surface where the balance weight is to be adhered.

·

Do not touch the adhesive surface of the balance weight.

·

Adhere a stick-on type balance weight to the flat surface*a shown in the illustration.

·

Push the balance weight with your finger to securely adhere it to the desired position.

·

Do not reuse balance weights.

·

Use only TOYOTA genuine stick-on type balance weights or equivalent.



HINT:
·

Use stick-on type balance weights for both the inner and outer side.

·

If the tires vibrate even after the off-the-car balance adjustment, adjust the wheel balance with on-the-car balancing as necessary.




iii.
C144018C01
2.052,3.667 2.281,3.823 0.229,0.156 10 false *a
*a 25 mm (0.984 in.)


except TMMF Made 15 inch Aluminum Wheel:

Maximum Wheel Imbalance:

8.0 g (0.0176 lb)


NOTICE:
·

Use a cleaning detergent to remove dirt, oil and water from the surface where the balance weight is to be adhered.

·

Do not touch the adhesive surface of the balance weight.

·

Adhere a stick-on type balance weight to the flat surface*a shown in the illustration.

·

Push the balance weight with your finger to securely adhere it to the desired position.

·

Do not reuse balance weights.

·

Use only TOYOTA genuine stick-on type balance weights or equivalent.



HINT:
·

Use clip-on type balance weights for the inner side, and stick-on type balance weights for the outer side.

·

If the tires vibrate even after the off-the-car balance adjustment, adjust the wheel balance with on-the-car balancing as necessary.