Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › FRAME WIRE › from 2020.07
RM36W0E _51 Engine / Hybrid System _087936 HYBRID / BATTERY CONTROL _0424590 FRAME WIRE A

HYBRID / BATTERY CONTROL  FRAME WIRE  INSTALLATION  


PROCEDURE

Hide 821H1 1.INSTALL FLOOR UNDER WIRE

CAUTION:

Wear insulated gloves.


a.
A464171

Install the bolt and nut.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


b.

Connect the HV floor under wire connector.


c.

Engage the 4 clamps.


d.

Install the 3 nuts and clamp.

A458351


e.
A464170

Install the HV floor under wire with the 2 nuts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 51201 2.INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

Hide 64740C 3.INSTALL FRONT FLOOR COVER LH (w/ Cover)

a.

Engage the 6 clamps to install the front floor cover LH to the vehicle body with the 2 bolts and 2 clips.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 57628E 4.INSTALL REAR FLOOR SIDE MEMBER COVER LH (w/ Cover)

a.

Install the rear floor side member cover LH with the grommet.


b.

Install the 2 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 821H1 5.CONNECT FLOOR UNDER WIRE

CAUTION:

Wear insulated gloves.


a.

Connect the floor wire connector.


b.

Connect the shield ground to the HV battery.


c.

Connect the 2 HV battery junction block assembly connectors.

NOTICE:

Make sure that the connectors are connected securely.



Hide G92N1 6.INSTALL HV BATTERY UPPER COVER PANEL

Hide G9230 7.INSTALL BATTERY COOLING BLOWER ASSEMBLY

Hide 71033 8.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY

Hide 72693 10.INSTALL REAR SEAT CUSHION LOCK HOOK

Hide 11.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

Hide 73350C 12.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY