Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Gasoline Model with Automatic Air Conditioning System) › from 2020.09
RM36W0E _58 Vehicle Interior _088019 HEATING / AIR CONDITIONING _0420298 AIR CONDITIONING SYSTEM(for Gasoline Model with Automatic Air Conditioning System) J

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Gasoline Model with Automatic Air Conditioning System)  Operation not Accepted Even If Air Conditioning Switch is Operated  


DESCRIPTION

If the air conditioning system cannot be operated using the air conditioning control assembly, the following factors may be the cause.

Symptom Factor
Air conditioning system cannot be operated using air conditioning control assembly

(With the exception of the switch indicators, no inputs are reflected when other switches operated)


·

LIN communication malfunction between air conditioning amplifier assembly and air conditioning control assembly

·

Short to +B or ground in air conditioning amplifier assembly circuit

·

Air conditioning amplifier assembly malfunction

·

Air conditioning control assembly malfunction

·

Harness or connector



WIRING DIAGRAM

E371003E14
0.406,2.76 0.76,2.948 0.354,0.188 10 false H31 0.385,2.906 2.615,3.167 2.229,0.26 10 false Air Conditioning Control Assembly 0.948,3.406 3.177,3.667 2.229,0.26 10 false : LIN Communication Line 4.813,3.052 5.167,3.24 0.354,0.188 10 false H24 4.792,3.208 7.104,3.417 2.313,0.208 10 false Air Conditioning Amplifier Assembly 5.083,0.552 5.24,0.75 0.156,0.198 10 false 5 5.26,0.656 5.542,0.844 0.281,0.188 10 false B 5.26,1.125 5.542,1.313 0.281,0.188 10 false IG+ 5.25,2.385 5.615,2.583 0.365,0.198 10 false GND 5.01,2.281 5.25,2.5 0.24,0.219 10 false 17 5.073,1.042 5.229,1.24 0.156,0.198 10 false 6 4.031,1.271 5.115,1.469 1.083,0.198 10 false ECU-IGP NO. 3 2.771,1.104 4.031,1.292 1.26,0.188 10 false from IGP Relay 4.156,0.781 5.229,0.979 1.073,0.198 10 false ECU-B NO. 2 2.354,0.646 4.177,0.896 1.823,0.25 10 false from Auxiliary Battery

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following procedure.


PROCEDURE

1.CHECK FOR DTC
a.

Clear the DTCs.

Body Electrical > Air Conditioner > Clear DTCs
50002 450

b.

Check for DTCs.

Body Electrical > Air Conditioner > Trouble Codes
50001 450

Result:
Result Proceed to
B14B287 is not output A
B14B287 is output B



A

2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - POWER SOURCE AND BODY GROUND)

B

2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - POWER SOURCE AND BODY GROUND)
a.

Disconnect the H24 air conditioning amplifier assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
H24-5 (B) - Body ground Always 11 to 14 V
H24-6 (IG+) - Body ground Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V


Standard Resistance:
Tester Connection Condition Specified Condition
H24-17 (GND) - Body ground Always Below 1 Ω



Result:
Result Proceed to
OK (except G16E-GTS) A
OK (for G16E-GTS) B
NG C



A

B

C

REPAIR OR REPLACE HARNESS OR CONNECTOR